Introduction to Routing and Packet Forwarding - Routing Protocols and Concepts - page 44

mac-address 0001.42dd.a220
no ip address
duplex auto
speed auto
shutdown

!
interface Serial0/0/0
description Link to R2
ip address 192.168.2.1 255.255.255.0
clock rate 64000

!
interface Serial0/0/1
no ip address
shutdown

!
interface Vlan1
no ip address
shutdown

!
ip classless
!
!
!
!
line con 0
password cisco
login
line vty 0 4
password cisco
login

!
end

R1#

Copy the command output.

Step 2.

Select the command output. From the HyperTerminal Edit menu, choose the Copy com-
mand.

Paste the output in Notepad. Step 3.

Open Notepad. Notepad is typically found on the Start menu under Programs >
Accessories . From the Notepad Edit menu, choose Paste .

Edit commands.

Step 4.

Some commands will have to be edited or added before the startup script can be applied to
a router. Some of these changes are as follows:

Adding a no shutdown command to Fast Ethernet and serial interfaces that are being used

■

Replacing the encrypted text in the enable secret command with the appropriate password

■