Information Technology Reference
In-Depth Information
!
interface Serial0/0/0
description Link to R2
ip address 192.168.2.1 255.255.255.0
clock rate 64000
!
interface Serial0/0/1
no ip address
shutdown
!
interface Vlan1
no ip address
shutdown
!
ip classless
!
!
!
!
line con 0
password cisco
login
line vty 0 4
password cisco
login
!
end
Examine the
show interfaces
command.
Step 3.
The
show interfaces
command displays statistics for all interfaces configured on the
router. A specific interface can be added to the end of this command to display the statis-
tics for only that interface. From privileged EXEC mode on the R1 router, examine the
output of the
show interfaces fastEthernet0/0
command. If the
--More--
prompt appears,
press the
Spacebar
to view the remainder of the command output:
R1#
show interfaces fastEthernet 0/0
FastEthernet0/0 is up, line protocol is up (connected)
Hardware is Lance, address is 0007.eca7.1511 (bia 0002.1625.lbea)
Description: R1 LAN
Internet address is 192.168.1.1/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00,
Last input 00:00:08, output 00:00:05, output hang never
Last clearing of “show interface” counters never
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
