Information Technology Reference
In-Depth Information
Task 1: Design and Document an Addressing Scheme
Use the 172.16.0.0/16 network to create an efficient addressing scheme that meets the following requirements.
Host Name
Interface
Number of Hosts
R2
Fa0/1
1000
R3
Fa0/1
400
R4
Fa0/1
120
R5
Fa0/1
6000
R5
Fa0/0
800
R6
Fa0/1
2000
R6
Fa0/0
500
Note: Interface Fa0/0 has been preconfigured on R1, R2, R3, and R4.
Task 2: Apply a Basic Configuration
On each router, use the following chart to complete the basic router configurations.
Console
VTY
Enable Secret
Clock Rate
Password
Password
Password
(if applicable)
cisco
cisco
cisco
56000
Task 3: Configure OSPF Routing
Configure OSPF routing on each router.
Step 1.
Verify that all routes were learned.
Step 2.
Task 4: Fine-Tuning OSPF
Use the following guidelines to complete this task.
Step 1.
R1 will never participate in a DR/BDR election.
R2 will always become the DR.
R3 and R4 will both have the same priority of 100.
R4 should always become the BDR.
Note: All priorities should be set on Fa0/0.
Force a DR/BDR election.
Step 2.
Search WWH ::




Custom Search