Information Technology Reference
In-Depth Information
Assign the first valid IP address of the BRANCH1-to-BRANCH2 link network to the
Serial 0/0/1 interface of the BRANCH1 router.
Assign the last valid IP address of the BRANCH1-to-BRANCH2 link network to the
Serial 0/0/0 interface of the BRANCH2 router.
Document the addresses to be used in Table 9-6.
Step 2.
Table 9-6
Addressing Table for Lab 9-3
Device
Interface
IP Address
Subnet Mask
Default
Gateway
HQ
Fa0/0
172.16.0.1
255.255.254.0
S0/0/0
192.168.1.17
255.255.255.252
S0/0/1
192.168.1.21
255.255.255.252
Lo1
209.165.200.225
255.255.255.252
BRANCH1
Fa0/0
172.16.2.1
255.255.255.0
S0/0/0
192.168.1.18
255.255.255.252
S0/0/1
192.168.1.25
255.255.255.252
BRANCH2
Fa0/0
172.16.3.1
255.255.255.128
S0/0/0
192.168.1.26
255.255.255.252
S0/0/1
192.168.1.22
255.255.255.252
PC1
NIC
172.16.2.254
255.255.255.0
172.16.2.1
PC2
NIC
172.16.1.254
255.255.254.0
172.16.0.1
PC3
NIC
172.16.3.126
255.255.255.128
172.16.3.1
Task 3: Prepare the Network
Cable a network that is similar to the one in the topology diagram.
Step 1.
You can use any current router in your lab as long as it has the required interfaces shown
in the topology.
Clear any existing configurations on the routers.
Step 2.
Task 4: Perform Basic Router Configurations
Perform basic configuration of the BRANCH1, BRANCH2, HQ, and ISP routers according to the fol-
lowing guidelines:
Configure the router host name.
Disable DNS lookup.
Configure an EXEC mode password.
Configure a message-of-the-day banner.
Configure a password for console connections.
Search WWH ::




Custom Search