Information Technology Reference
In-Depth Information
Task 15: Documentation
On each router, capture the following command output to a text (.txt) file and save for future reference:
show running-config
■
show ip route
■
show ip interface brief
■
show ip protocols
■
Task 16: Clean Up
Erase the configurations and reload the routers. Disconnect and store the cabling. For PC hosts that
are normally connected to other networks (such as the school LAN or the Internet), reconnect the
appropriate cabling and restore the TCP/IP settings.
Packet Tracer Companion: Basic EIGRP Configuration (9.6.1)
Packet Tracer
Companion
You can now open the file LSG02-Lab961.pka on the CD-ROM that accompanies this topic to repeat
this hands-on lab using Packet Tracer. Remember, however, that Packet Tracer is not a substitute for a
hands-on lab experience with real equipment.
Lab 9-2: Comprehensive EIGRP Configuration
Upon completion of this lab, you will be able to
Configure EIGRP routing
■
Configure bandwidth and turn off automatic summarization
■
Configure manual summarization
■
Figure 9-9 shows the topology diagram for this lab and Table 9-5 provides the interface, IP address,
and subnet mask information for the networking devices in this lab.
Figure 9-9
Topology Diagram for Lab 9-2
172.16.0.0/18
Fa0/0
Lo1
Lo1
RTA
172.16.64.0/20
172.16.128.0/19
S0/0/1
DCE
S0/0/0
10.0.0.8/30
10.0.0.0/30
EIGRP
100
T1
T1
Lo2
Lo2
172.16.80.0/20
172.16.160.0/19
S0/0/0
DCE
128 kbps
S0/0/1
S0/0/1
RTC
RTB
10.0.0.4/30
S0/0/0
DCE
Lo3
Lo3
172.16.96.0/20
172.16.192.0/19
Lo4
Lo4
172.16.112.0/20
172.16.224.0/19
