Information Technology Reference
In-Depth Information
Labs and Activities
Command Reference
In Table 8-4, record the command,
including the correct router prompt
, that fits the description.
Table 8-4
Commands for Chapter 8, The Routing Table: A Closer Look
Command
Description
Router(config)#
no ip classless
Configures the routing behavior as classful. On by default in
versions of Cisco IOS Software prior to Release 11.3.
Router(config)#
ip classless
Configures the routing behavior as classless. On by default in
Cisco IOS Software Release 11.3 and later.
Lab 8-1: Investigating the Routing Table Lookup
Process (8.4.1)
Upon completion of this lab, you will be able to
Cable a network according to the topology diagram
■
Erase the startup configuration and reload a router to the default state
■
Perform basic configuration tasks on a router
■
Determine level 1 and level 2 routes
■
Modify the configuration to reflect static and default routing
■
Enable classful routing and investigate classful routing behavior
■
Enable classless routing and investigate classless routing behavior
■
Scenarios
In this lab activity, there are two separate scenarios:
Scenario A: Level 1 and Level 2 Routes
—In this scenario, you will examine level 1 and level
2 routes in the routing table.
■
Scenario B: Classful and Classless Routing Behavior
—In this scenario, you will examine
classful and classless routing behavior.
■