Information Technology Reference
In-Depth Information
Examine the routing updates that are being received on BRANCH2.
Step 9.
What networks are being received in the RIP updates?
172.16.0.0/16
192.168.1.0/24
209.165.200.224/30
Are there any problems with these routing updates?
In the routing updates, the routes for the individual networks on the BRANCH1 LANs are
not being received. Because the router is receiving summarized routes, packets destined
for the BRANCH1 and BRANCH2 routers might not be routed properly.
If there are any problems with the routing configuration, record any commands that will be
necessary to correct the configuration errors.
configure terminal
router rip
no auto-summary
Do these commands need to be applied only to BRANCH2, or do they also need to be
applied to any other routers in the network?
Auto-summary should be turned off on all three of the routers.
If you have recorded any commands in the previous step, apply them to the router configu-
ration now.
Step 10.
View the routing information.
Step 11.
If any changes were made to the configuration in the previous step, view routing table
again.
Does the information in routing table or routing updates indicate any configuration errors?
no
If the answer is yes , troubleshoot the routing configuration again.
Attempt to ping between the hosts again.
Step 12.
From the host PC5, is it possible to ping PC6? yes
From the host PC5, is it possible to ping PC1? yes
From the host PC5, is it possible to ping PC3? yes
From the host PC1, is it possible to ping PC3? yes
From the HQ router, is it possible to ping PC1? yes
From the HQ router, is it possible to ping PC5? yes
Search WWH ::




Custom Search