Information Technology Reference
In-Depth Information
Lab 7-2: RIPv2 Challenge Configuration (7.5.2)
Upon completion of this lab, you will be able to
Create an efficient VLSM design given the requirements
■
Assign appropriate addresses to interfaces and document the addresses
■
Cable a network according to the topology diagram
■
Erase the startup configuration and reload a router to the default state
■
Configure routers including RIP version 2
■
Configure and propagate a static default route
■
Verify RIP version 2 operation
■
Test and verify full connectivity
■
Reflect on and document the network implementation
■
Scenario
In this lab activity, you will be given a network address that must be subnetted using VLSM to com-
plete the addressing of the network shown in the topology diagram in Figure 7-4. A combination of
RIP version 2 and static routing will be required so that hosts on networks that are not directly con-
nected will be able to communicate with each other.
Figure 7-4
Topology Diagram for Lab 7-2 (Answer)
HQ LAN1
HQ LAN2
192.168.40.0/26
192.168.40.64/26
PC3
PC4
Fa0/0
BRANCH LAN1
Fa0/1
Fa0/0
192.168.40.128/27
HQ
S0/0/1
DCE
S0/0/0
PC1
192.168.40.176/30
209.165.202.128/27
BRANCH LAN2
S0/0/0
DCE
192.168.40.160/28
S0/0/1
209.165.200.224/27
Fa0/0
Fa0/0
PC2
PC5
Branch
Fa0/1
ISP
Task 1: Subnet the Address Space
Examine the network requirements.
Step 1.
The addressing for the network has the following requirements:
The ISP LAN will use the 209.165.200.224/27 network.
■
The link between ISP and HQ will use the 209.165.202.128/27 network.
■
