Information Technology Reference
In-Depth Information
From R2, how many ICMP messages are successful when pinging PC1? 100% (5/5)
From R2, how many ICMP messages are successful when pinging PC4? 100% (5/5)
Check the connectivity between the PCs.
Step 2.
From PC1, is it possible to ping PC2? yes
What is the success rate? 100%
From PC1, is it possible to ping PC3? yes
What is the success rate? 100%
From PC1, is it possible to ping PC4? yes
What is the success rate? 100%
From PC4, is it possible to ping PC2? yes
What is the success rate? 100%
From PC4, is it possible to ping PC3? yes
What is the success rate? 100%
Task 9: Documentation
On each router, capture the following command output to a text (.txt) file and save for future refer-
ence.
show running-config
show ip route
show ip interface brief
show ip protocols
If you need to review the procedures for capturing command output, refer to “Lab 1-1: Cabling a
Network and Basic Router Configuration.”
Task 10: Clean Up
Erase the configurations and reload the routers. Disconnect and store the cabling. For PC hosts that
are normally connected to other networks (such as the school LAN or the Internet), reconnect the
appropriate cabling and restore the TCP/IP settings.
Packet Tracer Companion: RIPv2 Basic Configuration (7.5.1)
Packet Tracer
Companion
You can now open the file LSG02-Lab751.pka on the CD-ROM that accompanies this topic to repeat
this hands-on lab using Packet Tracer. Remember, however, that Packet Tracer is not a substitute for a
hands-on lab experience with real equipment. A summary of the instructions is provided within the
activity.
Search WWH ::




Custom Search