Information Technology Reference
In-Depth Information
Does the information in the interface status summary indicate any configuration errors?
no
If the answer is
yes
, troubleshoot the interface status of the interfaces again.
Troubleshoot the routing configuration on the BRANCH router.
Step 5.
What networks are shown in the routing table?
10.0.0.0/24
192.168.1.0/24
Are there any problems with the routing table?
There is no way to reach remote networks.
If there are any problems with the routing table, record any commands that will be neces-
sary to correct the configuration errors.
What networks are included in the RIP updates?
No RIP updates are being sent.
Are there any problems with the RIP updates that are being sent out from the router?
The 192.168.1.0/24 should be advertised in RIP updates.
If there are any problems with the RIP configuration, record any commands that will be
necessary to correct the configuration errors.
configure terminal
router rip
network 192.168.1.0
If you have recorded any commands, apply them to the router configuration now.
Step 6.
View the routing information.
Step 7.
If any changes were made to the configuration in the previous steps, view the routing
information again.
Does the information in the routing table indicate any configuration errors?
no
Does the information included in the RIP updates that are sent out indicate any configura-
tion errors?
no
If the answer to either of these questions is
yes
, troubleshoot the routing configuration
again.
What networks are included in the RIP updates?
192.168.1.0
Attempt to ping between the hosts again.
Step 8.
From the host PC1, is it possible to ping PC2?
no
From the host PC1, is it possible to ping PC3?
no
From the host PC1, is it possible to ping the Serial 0/0 interface of the HQ router?
yes
