Information Technology Reference
In-Depth Information
Assign subnetwork addresses to the topology diagram in Figure 5-13.
Step 3.
Assign subnet 1 in the 192.168.1.0 network to the WAN link between the HQ and
BRANCH routers.
■
Assign subnet 2 in the 192.168.1.0 network to the LAN attached to the HQ router.
■
Task 2: Determine Interface Addresses
Assign appropriate addresses to the device interfaces.
Step 1.
Assign the first valid host address in the 209.165.202.128/27 network to the LAN
interface on the ISP router.
■
Assign the last valid host address in the 209.165.202.128/27 network to PC3.
■
Assign the first valid host address in the 209.165.200.224/30 network to the WAN
interface of the ISP router.
■
Assign the last valid host address in the 209.165.200.224/30 network to the Serial
0/0/1 interface of the HQ router.
■
Assign the first valid host address in the HQ LAN network to the LAN interface of the
HQ router.
■
Assign the last valid host address in the HQ LAN network to PC 2.
■
Assign the first valid host address in the HQ/BRANCH WAN link to the Serial 0/0/0
interface of the HQ router.
■
Assign the last valid host address in the HQ/BRANCH WAN link to the Serial 0/0/0
interface of the BRANCH router.
■
Assign the first valid host address in the 10.10.2.0/23 network to the LAN interface on
the BRANCH router.
■
Assign the last valid host address in the 10.10.2.0/23 network to PC1.
■
Document the addresses to be used in Table 5-6.
Step 2.
Task 3: Prepare the Network
Cable a network that is similar to the one shown in Figure 5-13.
Step 1.
You can use any current router in your lab as long as it has the required interfaces shown
in the topology.
Note:
If you use 1700, 2500, or 2600 routers, the router outputs and interface descriptions will appear different.
Clear any existing configurations on the routers.
Step 2.
Task 4: Perform Basic Router Configurations
Perform basic configuration on the BRANCH, HQ, and ISP routers according to the following guidelines:
Configure the router host name.
■
Disable DNS lookup.
■
