RIP Version 1 - Routing Protocols and Concepts - page 210

builds an update to send out that interface. The update includes all networks known to R1
except the network of the interface. Finally, R1 builds an update to send to R2. Because of
split horizon, R1 only includes the 192.168.1.0 network in the update.

Discontinue the debug output with the undebug all command.

Step 4.

R1# undebug all
All possible debugging has been turned off

Packet Tracer Companion: Basic RIP Configuration (5.6.1a)

Packet Tracer
Companion

You can now open the file LSG02-Lab561a.pka on the CD-ROM that accompanies this topic to repeat
this portion of the hands-on lab using Packet Tracer. Remember, however, that Packet Tracer is not a
substitute for a hands-on lab experience with real equipment. A summary of the instructions is provid-
ed within the activity.

Scenario B: Running RIPv1 with Subnets and Between
Classful Networks

Task 1: Make Changes Between Scenario A and Scenario B

Change the IP addressing on the interfaces as shown in Figure 5-11 and Table 5-5.

Step 1.

Figure 5-11 Topology Diagram for Scenario B

172.30.3.0/24

PC2

Fa0/0

R2

S0/0/1
DCE

S0/0/0

172.30.2.0/24 192.168.4.8/30

172.30.1.0/24 192.168.5.0/24

S0/0/0
DCE

S0/0/1

Fa0/0 Fa0/0

R1 R3

PC1 PC3