Information Technology Reference
In-Depth Information
Task 3: Assign IP Addresses to the Network Devices
Assign the appropriate addresses to the device interfaces. Document the addresses to be used in Table
3-5 shown earlier.
Assign addresses to the HQ router.
Step 1.
Assign the first valid host address in the HQ LAN subnet to the LAN interface.
1.
Assign the first valid host address in the link from HQ to BRANCH1 subnet to the
S0/0/0 interface.
2.
Assign the first valid host address in the link from HQ to BRANCH2 subnet to the
S0/0/1 interface.
3.
Assign addresses to the BRANCH1 router.
Step 2.
Assign the first valid host address in the BRANCH1 LAN 1 subnet to the Fa0/0
LAN interface.
1.
Assign the first valid host address in the BRANCH1 LAN 2 subnet to the Fa0/1
LAN interface.
2.
Assign the last valid host address in the link from HQ to BRANCH1 subnet to the
WAN interface.
3.
Assign addresses to the BRANCH2 router.
Step 3.
Assign the first valid host address in the BRANCH2 LAN 1 subnet to the Fa0/0
LAN interface.
1.
Assign the first valid host address in the BRANCH2 LAN 2 subnet to the Fa0/1
LAN interface.
2.
Assign the last valid host address in the link from HQ to BRANCH2 subnet to the
WAN interface.
3.
Assign addresses to the host PCs.
Step 4.
Assign the last valid host address in the HQ LAN subnet to PC1.
1.
Assign the last valid host address in the BRANCH1 LAN 1 subnet to PC2.
2.
Assign the last valid host address in the BRANCH1 LAN 2 subnet to PC3.
3.
Assign the last valid host address in the BRANCH2 LAN 1 subnet to PC4.
4.
Assign the last valid host address in the BRANCH2 LAN 2 subnet to PC5.
5.
Task 4: Test the Network Design
Packet Tracer
Companion
You can now open the file LSG02-Lab352.pka on the CD-ROM that accompanies this topic to apply
and verify your addressing scheme. Check to see that all devices on directly connected networks can
ping each other.
