Information Technology Reference
In-Depth Information
However, one summary route remains: the WAN links between HQ and B1 and HQ and B2.
Calculate the summary route for the WANs attached to HQ.
WANs in binary:
00001010.00000000.00000000.00000000
00001010.00000000.00000000.00000100
Summary: 10.0.0.0/29
Record the command that ISP will use to summarize the WANs. Use the exit interface version of the
static route
command.
ip route 10.0.0.0 255.255.255.248 Serial0/0/0
Now you can test your answers to the preceding exercise by completing Packet Tracer Exercise 2-4:
Default Route Configuration.
Packet Tracer Exercise 2-4: Default Route Configuration
Packet Tracer
Activity
Open file LSG02-0204.pka on the CD-ROM that accompanies this topic to perform this exercise using
Packet Tracer. Complete Tasks 1-5.
Task 1: Remove Static Routes on B1 and B2
Before configuring the default routes, remove the summary routes on B1 and B2.
Step 1.
To verify that all the static routes are removed from B1 and B2, view the routing tables.
Only directly connected networks should be listed.
Step 2.
Your completion percentage should still be 0%. No commands are graded yet.
Task 2: Configure Default Routes on B1, B2, and HQ
Configure the default route on B1 according to your answers in the section “Configuring
Default Static Routes Exercise.”
Step 1.
Your completion percentage should be 14%. If not, click
Check Results
to see which
required components are not yet completed.
Configure the default route on B2 according to your answers in the section “Configuring
Default Static Routes Exercise.”
Step 2.
Your completion percentage should be 29%. If not, click
Check Results
to see which
required components are not yet completed.
Configure the default route on HQ according to your answers in the section “Configuring
Default Static Routes Exercise.”
Step 3.
Your completion percentage should be 43%. If not, click
Check Results
to see which
required components are not yet completed.
