Biomedical Engineering Reference
In-Depth Information
Chen, K., Merritt, D.R., Howard, W.G., Schmidt, C.L., Skarstad, P.M., 2006. Hybrid cathode
lithium batteries for implantable medical applications. J. Power Sources 162, 837
840.
Cook-Chennault, K.A., Thambi, N., Sastry, A.M., 2008. Powering MEMS portable devices
—
a
review of non-regenerative and regenerative power supply systems with special emphasis on piezo-
electric energy harvesting systems. Smart Mater. Struct. 17, 043001.
Day, L., McNeil, I., 1995. Biographical Dictionary of the History of Technology. Routledge,
London.
Drews, J., Fehrmann, G., Staub, R., Wolf, R., 2001. Primary batteries for implantable pace-
makers and defibrillators. J. Power Sources 97
749.
Duffy, M., Carroll, D., 2004. Electromagnetic generators for power harvesting. In: Power
Electronics Specialists Conference, PESC 04,
98, 747
June 20
26, Aachen, Germany, vol. 3,
pp. 2075
2081.
El-Hami, M., Glynne-Jones, P., White, N.M., Hill, M., Beeby, S., James, E., et al., 2001. Design
and fabrication of a new vibration-based electromechanical power generator. Sens. Actuators
A Phys. 92 (1
3), 335
342.
Feenstra, J., Granstrom, J., Sodano, H., 2008. Energy harvesting through a back-pack employing
a mechanically amplified piezoelectric stack. Mech. Syst. Signal Process. 22 (3), 721
734.
Fernandez, V., Fandino, J., Sauvey, C., Yonnet, J.P., Reyne, G., Cugat, O., 2000. A design meth-
odology for permanent magnet microbearings. IEEE Trans. Magn. 36 (4), 1919
1922.
Flipsen, B., Bremer, A., Jansen, A., Veefkind, M., 2004. Towards a selection method for design-
ing alternative energy systems in consumer products. In: Proceedings of the TMCE April 12
16,
Lausanne, Switzerland, pp. 8.
Flipsen, S.F.J., 2006. Power sources compared: the ultimate truth? J. Power Sources 162 (2),
927
934.
Flipsen, S.P.J., 2005. Alternative Power Sources for Portables and Wearables. Part 1: Power
Generation and Part 2: Energy Storage. Personal Energy Systems Programme. Delft University
of Technology, Delft, The Netherlands.
Gage, G.J., Ludwig, K.A., Otto, K.J., Ionides, E.L., Kipke, D.R., 2005. Naive coadaptive corti-
cal control. J. Neural Eng. 2 (2), 52
63.
Gao, P.X., Song, J., Liu, J., Wang, Z.L., 2007. Nanowire piezoelectric nanogenerators on plastic
substrates as flexible power sources for nanodevices. Adv. Mater. 19 (1), 67
72.
Gavrilov, L.A., Heuveline, P., 2003. Aging of population. In: Demeny, P., McNicoll, G. (Eds.),
The Encyclopedia of Population. Macmillan Reference, New York, pp. 32
37.
Ghalichechian, N., Modafe, A., Beyaz, M.I., Ghodssi, R., 2007. A rotary micro-motor supported
on microball bearings.
In: Solid-State Sensors, Actuators and Microsystems Conference,
Transducer 2007, June 10
1126.
Ghalichechian, N., Mccarthy, M., Beyaz, M.I., Ghodssi, R., 2008. Measurement and modeling of
friction in linear and rotary micromotors supported on microball bearings. In: Micro Electro
Mechanical Systems, MEMS 2008, Nov. 9
12, Sendai, Japan, pp. 507
510.
Ghantasala, M.K., Qin, L., Sood, D.K., Zmood, R.B., 2000. Design and fabrication of a micro
magnetic bearing. Smart Mater. Struct. 9, 235
240.
Gorge, G., Kirstein, M., Erbel, R., 2001. Microgenerators for energy autarkic pacemakers and
defibrillators: fact or fiction? Herz 26 (1), 64
14, Lyon, France, pp. 1123
68.
Goto, H., Sugiura, T., Kazui, T., 1998. Feasibility of the automatic generating system (AGS)
for quartz watches as a leadless pacemaker power source: a preliminary report. In:
Proceedings of Engineering in Medicine and Biology Society, Oct. 29
Nov. 1, Hong Kong,
vol. 1, pp. 417
419.
