Information Technology Reference
In-Depth Information
Building a rack
There needs to be something inside the spinner that will flick the gear teeth to
make the spinner spin. This will be accomplished with a part that will slide past the
spinner with a finger sticking out to catch the gear teeth as it goes by. The spring
attaches to this part and returns it to its resting position when released to catch the
gear after spinning, and hold the numbers still. This piece could extend from the
back of the spinner as a simple button that is pressed to accomplish the spin, but to
make things more stylish this piece will curve around the bottom of the spinner box
with a finger hole.
1.
Begin by revealing the SpringExtended and SpringCompressed objects
created earlier and rotating ( R ) them 90 degrees around the x axis ( X ). Move
( G ) them about 23 along the x axis ( X ) and move ( G ) them again along the
y axis until they are both resting against the bottom of the box. This doesn't
have to be exact, it's just a guide for future building.
 
Search WWH ::




Custom Search