Information Technology Reference
In-Depth Information
Printing and assembly
Print
Head.STL
,
Body.STL
,
Torso.STL
,
Arms.STL
,
Legs.STL
, and four copies of
Peg.
STL
. Snap three of the pegs into the holes in the body. Snap the torso onto the peg at
the bottom of the body. Push the last peg through the hole in the bottom of the torso.
Snap the legs into the hip peg on either side. Snap the arms. Press the head into the
neck, join firmly being careful not to break the neck joint. If it does break remove it
with a pair of needle nosed pliers and glue it back in place with superglue. Allow it
to dry and then try again. Then pose and play with the new robot.
