Graphics Programs Reference
In-Depth Information
FiGuRE 16.73
The completed back deck
2.
Thaw the A-WALL-EXTR-3DOB and A-ROOF layers. Also thaw all layers
beginning with A-ELEV except for those with a -PATT or -BNDY suffix.
3.
Click the TOP face of the ViewCube to change the view orientation of
your drawing, and then zoom into your east elevation (see Figure 16.74).
The east elevation is the one that displays the sliding glass door; it is
found in the upper-right portion of the drawing file provided in this
chapter's download.
4.
Use the Endpoint osnap and carefully draw a closed polyline around
the thin roof surface.
Make sure that the pline follows both the inner and outer surfaces
of the roof covering and extends to the limits of the pop-out. There
should be a total of six picks and then the Close option.
5.
Make the A-ROOF-DECK-3DOB layer current, and then draw a closed
polyline around the perimeter of the roof deck in the east elevation.
6.
Pick the southeastern corner of the ViewCube to change to an isomet-
ric view of your drawing. Zoom back into the east elevation.
Search WWH ::
Custom Search