Graphics Programs Reference
In-Depth Information
Printing a Drawing
You'll learn to plot the individual plan sheets in a moment, but your first task will
be to print 14A-FPLAY1.dwg from model space at a scale of 3 16 = 1 -0 (1 = 70)
on an 8.5 ″× 11 (210 mm × 297 mm) format printer. In this exercise, you'll use the
DWFx ePlot (XPS Compatible).pc3 printer. Since the DWF plotter will simply plot
to a file, you could select any sheet size you wanted. To remain consistent with
the layouts you have already created, you will use a standard Letter (A4) sheet
size for this exercise.
The first step is to configure your layers by assigning lineweights to them.
Determining Lineweights for a Drawing
Click Cancel to close the Plot dialog box, and look at the 14A-FPLAY1 drawing as a
whole. You need to decide on weights for the various lines. The floor plan is drawn
as if a cut were made horizontally through the building just below the tops of the
window and door openings. Everything that was cut will be given a heavy line.
Objects above and below the cut will be given progressively lighter lines, depend-
ing on how far above or below the cut the objects are located.
In this system, the walls, windows, and doors will be heaviest. The roof, headers,
fixtures, deck, and steps will be lighter. For emphasis, you'll make the walls a little
heavier than the windows and doors. The hatch pattern will be very light, and the
outline of the various components will be heavier for emphasis. Text and the title
block information will use a medium lineweight. These are general guidelines;
weights will vary with each drawing.
NOTE Lineweight standards vary for each trade and profession that uses
autoCaD. Details usually follow a system that is independent from the one used
by other drawings in the same set. Section lines, hidden lines, center lines, cut-
ting plane lines, break lines, and so on will all be assigned specific lineweights.
You'll use four lineweights for the project, as shown in Table 15.1.
tABLE 15.1 The Four Lineweights Used in the My Cabin Project
Weight
thickness in inches
Very light
0.005 (0.13 mm)
Light
0.008 (0.20 mm)
Medium
0.010 (0.25 mm)
Heavy
0.014 (0.35 mm)
Search WWH ::




Custom Search