Printing an AutoCAD Drawing - AutoCAD 2011 and AutoCAD LT 2011: No Experience Required - page 802

3. Below the radio buttons is the Default Plot Style Table drop-down list.
Here you can select a plot-style table file (of the type selected by the
radio buttons) to be assigned automatically to new drawings. One of
the options is None.
4. Close the Plot Style Table Settings dialog box. Then close the Options
dialog box.
Throughout this topic, all the drawings that you created (or downloaded) were
set up to use color-dependent plot styles, so you can assign this type of plot style to
the drawing. Usually, you do this by assigning a particular plot-style table file to
a layout or to model space. To finish the tour and this chapter, you'll assign one
of the available plot-style table files to the A-100.dwg , A-200 , and C-101.dwg draw-
ings and use the Preview option to see the results:
1. Make A-100.dwg the current drawing if it isn't already.
2. Click the A-101 layout to make it current.
3. Right-click on the Quick View Layouts button in the status bar, and
select Page Setup Manager. This will open the Page Setup Manager
dialog box shown in Figure 15.17.
4. Select the DWFX-8H11 page setup and click the Modify button.
FiGuRE 15.17 Accessing the DWFX-8H11 page setup from the Page
Setup Manager dialog box