Graphics Programs Reference
In-Depth Information
FiGuRE 12.31 The completed dimensions
using other types of Dimensions
AutoCAD provides tools for placing radial and angular dimensions on the draw-
ing and for placing linear dimensions that are neither vertical nor horizontal.
You'll make some temporary changes to the cabin file that you just saved, so
that you can explore these tools and then close the drawing without saving it:
1. Make layer 0 current.
2. Freeze the A-ANNO-TEXT, A-ANNO-DIMS, A-ELEV-DECK, and
A-ELEV-DECK-STRS layers.
3. Use the FILLET command to fillet the top-right corner of the roof
with a radius of 5 -0 (1525 mm).
4. Start the LINE command, and then pick the lower-right corner of the
roof as the start point.
5. Activate the Nearest osnap, and pick a point on the roof's ridgeline.
The right end of the cabin should look like Figure 12.32.
 
Search WWH ::




Custom Search