Graphics Programs Reference
In-Depth Information
r e s t o r I n g t h e s t a t e o F M U l t I p l e l a y e r s (Continued)
3.
Selecting the Restore States button from the Layer State - Successful
Import dialog box will automatically apply the imported layer state.
You'll look at the restore options in more detail in a moment, so click
the Close Dialog button for now.
4.
The lower-right corner of the Layer States Manager dialog box has a
circular button with an arrow pointing to the right. Click it to expand
the dialog box.
5.
When you are restoring layer states, it's not necessary to restore all
properties associated with a layer. Instead, using the expanded Layer
States Manager dialog box, you can pick the specific properties to
restore by checking or unchecking the associated property.
6.
With the 12-Start layer state selected, click the Restore button found
at the bottom of the Layer States Manager.
The Layer States Manager closes, the selected layer properties are restored
(all properties in this case), and you are taken back to your drawing.
4. Set the Endpoint and Midpoint object snaps to be running.
5. Set the status bar so that only the Object Snap and Dynamic Input
buttons are in their on positions.
6. Click the Annotate tab. Your drawing will look like Figure 12.1.
FiGuRE 12.1 The cabin floor plan and elevations with the Annotate panels at the top of
the drawing area
 
Search WWH ::




Custom Search