Graphics Programs Reference
In-Depth Information
point is the justification point for the first attribute: the room label text. Follow
these steps to define the block:
1.
Click the Create button found on the Insert tab
➢
Block panel to
start the
BLOCK
command.
2.
In the Block Definition dialog box, enter
A-ROOM-IDEN
for the name.
3.
Click the Pick Point button. In the drawing, use the Insert osnap and
choose the top attribute definition. Doing so aligns the justification
point of this attribute with the insertion point of the block.
4.
Back in the Block Definition dialog box, click the Select Objects but-
ton. In the drawing, pick each attribute definition individually in the
order you created them. Selecting them in this order causes them to
be listed in the Enter Attributes dialog box in the same order.
5.
Press
↵
after selecting the last attribute definition.
6.
After being sure Delete is still selected, check the Annotative check box
to enable it, making the A-ROOM-INFO block Annotative. Assuming
the Block Definition dialog box looks like Figure 9.19; click OK to dis-
miss the dialog box.
FiGuRE 9.19
The Block Definition dialog box for the A-ROOM-IDEN block
The A-ROOF-INFO block is defined, and the attribute definitions
are deleted from the drawing.
7.
Save your drawing as
09A-FPLAY1.dwg
.
Search WWH ::
Custom Search