Graphics Programs Reference
In-Depth Information
door reference symbols and apartment number symbols for those units. Use 0,0 for the
Wblock insertion base point. Also make sure the Delete Objects check box is selected in
the Write Block dialog box before you click the Write Block button.
FIGURE 14.3
Units to be
exported to the
Floor1 file
Select these units for the Wblock command.
4.
Using Figure 14.4 as a guide, insert the Unit2.dwg file into the corners where the other
eight units were previously. Metric users should use Unit2-metric.dwg. These files can
be found in the Chapter 14 sample files available on the companion website. If you didn't
create the Unit2 file earlier in this chapter, use the 14a-unit2.dwg file.
FIGURE 14.4
Insertion infor-
mation for Unit2.
Metric coordinates
are shown in
brackets.
Insert Unit2 at coordinate 31'-5", 104'-6" [957,3184];
x-scale factor = 1; y-scale factor = -1 (minus one).
Insert Unit2 at coordinate 31'-5", 43'-8" [957,1330];
x- and y-scale factor=1.
Mirror inserted Unit2
blocks to this side.
