Graphics Programs Reference
In-Depth Information
Figure 4.45
The Insert Edge
Loop toolcre-
ates subdivisions
quickly.
4. Right-click the cylinder, and choose Face from the marking menu. Select the end
faces, and scale them down a bit as in Figure 4.46. This gives you the main part of the
boiler.
5. Make a new poly cylinder as before. Scale the
cylinder to make it a f lat plate, and place it on
the boiler. The cylinders need to be scaled to fit
snugly over the boiler as you see fit. This gives you
a simple weld plate to provide the boiler with some
detail. Choose Edit Duplicate Special r to copy
the plate four times in one action. In the option
box, set Number Of Copies to 4. Move these dupli-
cates one by one back along the boiler cylinder, and
place them through the skinny section of the boiler.
Arrange a total of five plates along the boiler, as shown in Figure 4.47.
Figure 4.46
Scale the end faces.
Figure 4.47
Arrange five plates
along the boiler.
Search WWH ::




Custom Search