Graphics Programs Reference
In-Depth Information
N o t e
DIM variables - There are over 70 variables for setting dimensioning,
but most are in any case set in the Dimension Styles dialog or as
dimensioning proceeds. However one series of the Dim variables may
be of interest
DMBLOCK - Sets a name for the block drawn for an operator's own
arrowheads. These are drawn in unit sizes and saved as required
DIMBLK1 - Operator's arrowhead for fi rst end of line
DIMBLK2 - Operator's arrowhead for other end of line
DRAGMODE - Set to 0 no dragging; set to 1 dragging on; set to 2
automatic dragging
DRAG1 - Sets regeneration drag sampling. Initial value is 10
DRAG2 - Sets fast dragging regeneration rate. Initial value is 25
FILEDIA - Set to 0 disables Open and Save As dialogs; set to 1 enables
these dialogs
FILLMODE - Set to 0 hatched areas are fi lled with hatching; set to 0
hatched areas are not fi lled; and set to 0 and plines are not fi lled
GRIPS - Set to 1 and grips show; set to 0 and grips do not show
LIGHTINGUNITS - Set to 1 (international) or 2 (USA) for photometric
lighting to function
MBUTTONPAN - Set to 0 no right-click menu with the Intellimouse; set
to 1 Intellimouse right-click menu on
MIRRTEXT - Set to 0 text direction is retained; set to 1 text is mirrored
NAVVCUBE - Sets the ViewCube on/off
NAVVCUBELOCATION - Controls the position of the ViewCube
between top right ( 0 ) and bottom left ( 3 )
NAVVCUBEOPACITY - Controls the opacity of the ViewCube from 0
(hidden) to 100 (dark)
Search WWH ::




Custom Search