The Modify tools - Introduction to AutoCAD 2011: 2D and 3D Design - page 125

REVISION NOTES (CONTINUED)
4. When using Mirror, if text is part of the area to be mirrored, the set variable Mirrtext will
require setting - to either 1 or 0.
5. With Offset the Through prompt can be answered by clicking two points in the drawing
area the distance of the desired offset distance.
6. Polar Arrays can be arrays around any angle set in the Angle of array fi eld of the Array
dialog.
7. When using Scale, it is advisable to practise the Reference prompt.
8. The Trim tool in either its Trim or its No trim modes is among the most useful tools in
AutoCAD 2011.
9. When using Stretch circles are unaffected by the stretching.
10. There are some other tools in the Home/Modify panel not described in this topic. The
reader is invited to experiment with these other tools. They are:
Bring to Front, Send to Back, Bring above Objects, Send under Objects;
Set by Layer; Change Space; Lengthen; Edit Spline, Edit Hatch; Reverse.