Graphics Programs Reference
In-Depth Information
Command:_trim
Current settings: Projection UCS. Edge = Extend
Select cutting edges ....
Select objects or <select all>: pick the left-hand
circle 1 found
Select objects: right-click
Select objects to trim or shift-select to extend
or [Fence/Project/Crossing/Edge/eRase//Undo]:
pick one of the objects
Select objects to trim or shift-select to extend
or
[Fence/Crossing/Project/Edge/eRase/Undo: pick the
second of the objects
Select objects to trim or shift-select to extend
or [Project/Edge/Undo]: right-click
Command:
3.
This completes the
First stage
as shown in Fig. 5.31. Repeat the
Trim
sequence for the
Second stage
.
4.
The
Third stage
drawing of Fig. 5.31 shows the result of the trims at
the left-hand end of the drawing.
5.
Repeat for the right-hand end. The fi nal result is shown in the drawing
labelled
Result
in Fig. 5.31 .
100
R20
R15
R15
R10
Original drawing
cutting edges
objects to trim
cutting edges
First stage
Second stage
Third stage
Result
Fig. 5.31
First example - Trim
Search WWH ::
Custom Search