The Modify tools - Introduction to AutoCAD 2011: 2D and 3D Design - page 102

Specify second point or [Exit/Undo] <Exit>: pick
Specify second point or [Exit/Undo] <Exit>: pick
Specify second point or [Exit/Undo] <Exit>: e
(Exit)
Command

The result is shown in Fig. 5.6 .

base point

second point

Fig. 5.6 Second example - Copy - Multiple copy

The Mirror tool

First example - Mirror (Fig. 5.9)

1. Construct the outline Fig. 5.7 using the Line and Arc tools.
2. Call the Mirror tool - left-click on its tool icon in the Home/Modify
panel (Fig. 5.8) or from the Modify drop-down menu, or enter mi or
mirror at the command line. The command line shows:

30

R35

R35

Fig. 5.7 First
example -
Mirror - outline

Fig. 5.8 The Mirror tool from the Home/Modify panel

Command:_mirror
Select objects: pick fi rst corne r Specify opposite
corner: pick 7 found
Select objects: right-click
Specify fi rst point of mirror line: pick