Graphics Reference
In-Depth Information
Figure 6-17. Selected section to remove
Remove the jagged section
Go to the Parts section that is now dis-
played in the top-right corner of the
screen. Click the X next to the part you
want to remove (the jagged parts of the
scan) to delete that part. netfabb will ask
you if you really want to remove it. Click
OK.
Figure 6-18. The part moved to the platform
Repair the holes
Next, we will repair the holes in the mod-
el. There is probably a large hole under
the chin where the scanner could not
gather information, and possibly a hole
in the top of the head.
You will now have a nice clean edge at
the bottom of your model.
Move to origin
Move the part to the platform by select-
ing Part→Move, then selecting the To
Origin button from the dialog box and
clicking Move (see Figure 6-18 ).
Select the Repair tool (it looks like a red
cross). The model will turn blue and you
can see the triangles in the mesh. There
will be yellow spots where repairs are
necessary. To repair the model, click the
Automatic Repair button.
Then select Default Repair from the dia-
log box and press the Execute button.
netfabb will ask you if you want to re-
move the old part. Click Yes.
Then click the Apply Repair button at the
bottom of the righthand side of the
screen. In the dialog box that opens, se-
lect Yes when asked if you want to re-
move the old part. Figure 6-19 shows the
repaired model.
 
Search WWH ::




Custom Search