Graphics Reference
In-Depth Information
Figure 6-34. Closing faces
Figure 6-36. Preparing to reduce a ridge
Smooth with the Flatten and Reduce Brushes
These ridges will not smooth out with
the Smooth brush, so we need to use
additional brush tools.
Select and use the Flatten and Reduce
brushes ( Figure 6-37 ) to flatten out the
bumps.
Then use the brush to soften it out.
Figure 6-38 shows the results.
Figure 6-35. Erasing and filling
The model should be manifold and appear
“capped” with a flat back.
Deselect
This model has some ridges in the roof-
line resulting from the extrusion that
need to be smoothed out and repaired.
Click on the Select menu in the naviga-
tion bar and click Clear Selection, to clear
the previous selection. See Figure 6-36 .
 
Search WWH ::




Custom Search