Hardware Reference
In-Depth Information
12. What will happen if you connect a USB 1.1 device to a USB 2.0 port on a PC?
A.
The device will work fine.
B.
The device will work, but in reduced functionality mode.
C.
The device will work, but at a lower speed than it is capable of.
D.
The device won't work at all.
13. Can you use a FireWire 400 device in a FireWire 800 port?
A.
Yes, with no adaptation needed.
B.
Yes, but the device will not operate at maximum speed.
C.
Yes, but you need an adapter to make the plug physically compatible.
D.
No, they are different technologies that are not compatible.
14. Handle circuit boards by touching only the
.
A. Flat part of the board
B. Edges
C. Transistors
D. Chips
15. Circuit boards should be stored in an antistatic bag until you are ready to install them, to
avoid
damage.
A. DVI
B. VGA
C. ESI
D. ESD
16. When installing a DIMM in a motherboard, which of the following should you do?
A.
Push the DIMM straight down into the slot, perpendicular to the motherboard.
B.
Push in the DIMM at a 45-degree angle.
C.
Push in the DIMM at a 30-degree angle, and then rotate it up to a 90-degree angle to
lock it in place.
D.
Lay the DIMM into the motherboard flat, parallel to the motherboard.
17. What kind of drives require you to set master/slave jumpers?
A. SATA
B. PATA
C. SCSI
D. Solid state
Search WWH ::




Custom Search