Graphics Programs Reference
In-Depth Information
• We run the
LINE
command at any point, block direction X (
POLAR
or
ORTHO
) and assign the distance:
Command:
LINE
Specify first point:
any point
Specify next point or [Undo]:
0.6
• We block the Z direction and assign the distance:
Specify next point or [Undo]:
0.7
• The best way to specify this point is with relative coordinates:
Specify next point or [Close/Undo]:
@-0.3,0,0.4
• We block the Z direction and assign the distance:
Specify next point or [Close/Undo]:
0.7
• The best way to close the left polygon is to pause over the first point,
move the cursor up to find the crossing, with Polar or Ortho coming from
the last point, and apply Close option to close the polygon:
Specify next point or [Close/Undo]:
point with OTRACK
Specify next point or [Close/Undo]:
C
• We copy all lines 1 meter in the Y direction:
Command:
COPY
Select objects: Specify opposite
corner:
6 found
Select objects:
Enter
Current settings: Copy mode = Multiple
Specify base point or [Displacement/
mOde] <Displacement>:
point
Specify second point or [Array] <use
first point as displacement>:
1
Search WWH ::
Custom Search