Civil Engineering Reference
In-Depth Information
Bernard-Gély,A. and Calgaro, J.-A., 1994,
ConceptiondesPonts
, Presses de l'Ecole Nationale
des Ponts et Chaussées, Paris, France.
Billington, D.P., 1985,
The Tower and the Bridge, The New Art of Structural Engineering
,
Princeton University Press, Princeton, New Jersey.
Byers, W.G., 2006, Railway Bridge Performance in Earthquakes that Damaged Railroads,
Proceedings of the 7th International Conference on Short and Medium Span Bridges,
Canadian Society for Civil Engineering
(CSCE), Montreal, QC.
Byers, W.G., 2009, Overview of bridges and structures for heavy haul operations, in
Inter-
nationalHeavyHaulAssociation(IHHA)BestPractices
, Chapter 7, R. & F. Scott, North
Richland Hills, TX.
Chow, V.T., 1959,
Open Channel Hydraulics
, McGraw-Hill, NewYork.
Federal Highway Administration (FHWA), 1990,
User Manual for WSPRO
, Publication
IP-89-027, Washington, DC.
Federal Railroad Administration (FRA), 2008,
Railroad Bridge Working Group Report to the
Railroad Safety Advisory Committee
, Washington, DC.
Hamill, L., 1999,
Bridge Hydraulics
,E&FNSpon, London, UK.
Hay, W.W., 1977,
Introduction to Transportation Engineering
, Wiley, NewYork.
Laursen, E.M., 1962,
Scour at Bridge Crossings
,
Transactions of the ASCE
, 127, Part 1,
NewYork.
Laursen, E.M., 1963,
Analysis of Relief Bridge Scour
,
Journal of Hydraulics Division
,
ASCE
,
89(HY3), NewYork.
Leonhardt, F., 1984,
Bridges
, MIT Press, Cambridge, MA.
Nagler, F.A., 1918, Obstruction of bridge piers to the flow of water,
Transactions of American
Society of Civil Engineers
(
ASCE
), 82.
Ramberger, G., 2002,
Structural Bearings and Expansion Joints for Bridges
, Structural Engi-
neering Document 6, International Association for Bridge and Structural Engineering
(IABSE), Zurich, Switzerland.
Richardson, E.V. and Davis, S.R., 1995,
Evaluating Scour at Bridges
, Hydraulic Engineering
Circular 18, FHWA, McLean, VA.
Schneider, V.R., Board , J.W., Colson, B.E., Lee, F.N., and Druffel, L., 1977,
Computation of
back-water and discharge at width constrictions of heavily vegetated floodplains
, Water
Resources Investigations 76-129, U.S. Geological Survey.
Sorgenfrei,D.F.andMarianos,W.N.,2000,Railroadbridges,in
BridgeEngineeringHandbook
,
Chapter 23, W.F. Chen and L. Duan, Eds, CRC Press, Boca Raton, FL.
Stanton, J.F., Roeder, C.W., and Campbell, T.I., 1999,
High-Load Multi-Rotational Bridge
Bearings
, NCHRP Report 432, National Academy Press, Washington, DC.
Taly, N., 1998,
Design of Modern Highway Bridges,
McGraw-Hill, NewYork.
Transportation Association of Canada (TAC), 2004,
Guide to Bridge Hydraulics
, Thomas
Telford, London, UK.
Unsworth, J.F., 2003,
Heavy Axle Load Effects on Fatigue Life of Steel Bridges
, TRR 1825,
Transportation Research Board, Washington, DC.
Unsworth, J.F. and Brown, C.H., 2006,
RapidReplacementofaMovableSteelRailwayBridge
,
TRR 1976, Transportation Research Board, Washington, DC.
Waddell, J.H., 1916,
Bridge Engineering,
Vol. 1, Wiley, NewYork.
Yarnell, D.L., 1934,
Bridge Piers as Channel Obstructions
, Technical Bulletin 442, U.S.
Department of Agriculture, Washington, DC.
