References - Natural Polymers, Biopolymers, Biomaterials, and Their Composites, Blends, and IPNs - page 392

fibers using BOR machine. Applied Composite
Materials 14 , 105-116.
Yousif, B. F. and El-Tayeb, N. S. M. (2008a).
High-stress three-body abrasive wear of treated
and untreated oil palm fiber-reinforced polyester
composites. Proceedings of the Institution of Me-
chanical Engineers, Part J: Journal of Engineer-
ing Tribology 222 (5), 637-646.
Yousif, B. F. and El-Tayeb, N. S. M. (2008b).
Wear and friction characteristics of CGRP com-
posite under wet contact condition using two dif-
ferent test techniques. Wear 265 (5-6), 856-864.
Yousif, B. F. and El-Tayeb, N. S. M. (2010). Wet
adhesive wear characteristics of untreated oil
palm fiber-reinforced polyester and treated oil
palm fiber-reinforced polyester composites using
the pin-on-disc and block-on-ring techniques.
Proceedings of the Institution of Mechanical En-
gineers, Part J: Journal of Engineering Tribol-
ogy 224 (2), 123-131.
Yousif, B. F., Nirmal, U., Lau, S. T. W., and
Devadas, A. (2008). The Potential of Using
Betelnut Fibers for Tribo-Polyester Composites
Considering Three Different Orientations. ASME
Conference Proceedings 2008 (48654), 79-84.
Yu, S., Hu, H., and Yin, J. (2008). Effect of rub-
ber on tribological behaviors of polyamide 66
under dry and water lubricated sliding. Wear
265 (3-4), 361-366.

Creighton, T. E. (1984). Proteins . Freeman, New
York, USA.
Eng, A. H., Ejiri, S., Kawahara, S., and Tanaka,
Y. (1994). Structural characteristics of natural
rubberrole of ester groups. J. Appl. Polym. Sci.:
Appl. Polym. Symp. 53 , 5-14.
Eng, A. H., Kawahara, S., and Tanaka, Y. (1993).
Determination of low nitrogen content of puri-
fied natural rubber. J. Nat. Rubb. Res. 8 (2),
109-113.
Eng, A. H., Tanaka, Y., and Gan, S. N. (1992).
FTIR studies on amino groups in purified Hevea
rubber. J. Nat. Rubb.Res. 7 (2), 152-155.
Fernando, W. S. E.,Yapa, P. A. J., and Jayas-
inghe, P. P. (1985). Preparation and properties of
low-nitrogen natural rubber. KautschukGummi-
Kunststoffe 38 (11), 1010-1011.
Fukushima, Y., Kawahara, S., and Tanaka, Y.
(1998). Synthesis of graft copolymers from
highly deproteinized natural rubber. J. Rubb.
Res. 1 (3), 154-166.
Kaneko, T., Nishioka, H., Nishi, T., and Jinnai,
H. (2005). Reduction of anisotropic image reso-
lution in transmission electron microtomography
by use of quadrangular prism-shaped section. J.
Electron Micros. 54 (5), 437-444.
Kato, M., Ito, T., Aoyama, Y., Sawa, K., Kaneko,
T., Kawase, N., and Jinnai, H. (2007). Three-di-
mensional structural analysis of a block copoly-
mer by scanning electron microscopy combined
with a focused ion beam. J. Polym. Sci., Part B:
Polym. Phys. 45 (6), 677-683.
Kawahara, S., Isono, Y., Washino, K., Morita,
T., and Tanaka, Y. (2001). High-resolution latex
state 13C-NMR spectroscopy: Part II. Effect of
particle size and temperature. Rubb. Chem. Tech-
nol . 74 (2), 295-302.
Kawahara, S., Kawazura, T., Sawada, T., and
Isono, Y. (2003). Preparation and characteriza-
tion of natural rubber dispersed in nano-matrix.
Polymer 44 (16), 4527-4531.
Kawahara, S. and Yamamoto, Y. (2007). Nano-
matrix structure formed for NR. Rubber World
237 (2), 26-31.
Kawahara, S., Yamamoto, Y., Fujii, S., Isono,
Y., Niihara, K., Jinnai, H., Nishioka, H., and
Takaoka, A. (2008). FIB-SEM and TEMT ob-
servation of highly elastic rubbery material with

28
Akabori, K., Yamamoto, Y., Kawahara, S., Jin-
nai, H., and Nishioka, H. (2009). Field emission
scanning electron microscopy combined with fo-
cused ion beam for rubbery material with nano-
matrix structure. Journal of Physics: Conference
Series 184 , 012-027.
Allen, P. W. and Bristow, G. M. (1963). The gel
phase in natural rubber 7 (2), 603-615.
Beach, E., Keefe, M., Heeschen, W., and Rothe,
D. (2005). Cross-sectional analysis of hollow la-
tex particles by focused ion beam-scanning elec-
tron microscopy. Polymer 46 (25), 11195-11197.
Brostow, W., Gorman, B. P., and Olea-Mejia
O. (2007). Focused ion beam milling and scan-
ning electron microscopy characterization of
polymer+metal hybrids. Materials Letters 61 (6),
1333-1336.