References - Natural Polymers, Biopolymers, Biomaterials, and Their Composites, Blends, and IPNs - page 376

natural-fiber reinforced composite. Composites
Part B: Engineering 67 , 597608.
Gardner, D. J., Oporto, G. S., Mills, R., and Azizi
Samir, M. A. S. (2008). Adhesion and surface is-
sues in cellulose and nanocellulose. Journal of
Adhesion Science and Technology 22 , 545-567.
Kentaro, A., Shiniro, I., and Hiroyuki, Y. (2007).
Obtaning cellulose nanofibers with a uniform
width of 15 nm from wood. Biomacromolecules
8 , 32763278.
Kim, D. Y., Nishiyama, Y., Wada, M., and Kuga,
S. (2001). High yield carbonization of cellulose
by sulphoric acid impregnation. Cellulose 8 ,
2933.
Klemm, D., Heublein, B., Fink, H. P. and Bohn,
A. (2005). Fascinating biopolymer and sustain-
able raw material. Angewandte Chemie Interna-
tional Edition. Cellulose 44 , 33583393.
Mallick, P. K. (1988). Fiber-Reinforced Com-
posites . Marcel Dekker Inc, America.
Maren, R. and William, T. W. (2004). Effect of
sulfate groups from sulfuric acid hydrolysis on
the thermal degradation behavior of bacterial
cellulose. Biomacromolecules 5 , 16711677.
Mohd. Sapuan, S. (1999). Bahan Komposit Be-
rasaskan Polimer. Serdang Penerbit Universiti,
Putra Malaysia.
Morán, J. I., Alvarez, V. A., Cyras, V. P., and
Vázquez, A. (2008). Extraction of cellulose and
preparation of nanocellulosefrome sisal fibers.
Cellulose 15 , 149159.
Mwaikambo, L. Y. and Ansell, M. P. (2002).
Chemical modification of hemp, sisal, jute, and
kapok fibers by alkalization. Journal of Applied
Polymer Science 84 , 22222234.
Rongji, Li, Jianming, Fei, Yurong, Cai, Yufeng,
Li, Jianqin, Feng, and Juming, Yao. (2009). Cel-
lulose whiskers extracted from mulberry: Anovel
biomass production. Carbohydrate Polymers 76 ,
9499.
Roohani, M., Habibi, Y., Belgacem, N. M., Ebra-
him, G., Karimi, A. N., and Dufresne, A. (2008).
Cellulose whiskers reinforced polyvinyl alcohol
copolymers nanocomposites. J. Eur. Polym. 44 ,
24892498.
Sain, M. and Panthapulakkal, S. (2006). Biopro-
cess preparation of wheat straw fibers and their

characterization. Industrial Crops and Products
2 , 18.
Segal, L., Greely, L., Martin, A. E., and Conrad,
C. M. (1959). An empirical method for estimat-
ing the degree of crystallinity of native cellulose
using X-ray diffractometer. Textille Res. J. 29 ,
786794.
Seydibeyoğlu, M. O. and Oksman, K. (2008).
Novel nanocomposites based on polyurethane
and micro fibrillated cellulose. J. Compos. Sci.
Technol. 68 , 908914.
Shebani, A. N. and Van Reenen, A. J. (2008).
The effect of wood extractives on the thermal
stability of different wood species. Thermochim.
Acta. 471 , 4350.
Sun-Young, Lee, Jagan, M. D., In-Aeh, K., Ge-
um-Hyun, D., Soh, Lee, Seong, Ok Han. (2009).
Nanocellulose reinforced PVE composite films:
Effects of Acid Treatment and filler loading. Fi-
bers and Polymers 10 , 7782.
Troedec, M., Sedan, D., Peyratout, C., Bonnet, J.,
Smith, A., Guinebretiere, R., Gloaguen, V., and
Krausz, P. (2008). Influence of various chemi-
cal treatment on the composition and structure of
hemp fibers. Composites Part A 39 (3), 514522.
Turbak, A. F., Snyder, F.W., and Sandberg, K.
R. (1983). Microfibrillated cellulose, A new cel-
lulose product. Journal of Applied Polymer Sci-
ence: ApplPolymSymp 37 , 815827.
Xue, Li, Lope, G., and Tabil, S. P. (2007). Chem-
ical treatments of natural fiber for use in natural
fiber-reinforced composites: A review. Journal
Polymer Environment 15 , 2533.
Yang, H. P., Yan, R., hen, H. P., Lee, D. H., and
Zheng, C. G. (2007). Characteristics of hemicel-
luloses, cellulose and lignin pyrolysis. Fuel 86 ,
17811788.
Youssef, H., Waleed, K., El-zawawy Maha, M.,
Ibrahim, and Alain, D. (2008). Processing and
characterization of reinforced polyethylene com-
posites made with lignocellulosic fibres from
Egyptian agro-industrial residues. Composites
Science and Technology 68 , 18771885.

18
Arora, A. and Padua, G. W. (2010). Review:
Nanocomposites in food packaging. Journal of
Food Science 75 , 43-48.