References - Natural Polymers, Biopolymers, Biomaterials, and Their Composites, Blends, and IPNs - page 335

Mi, F. L., Shyu, S. S., Wong, T. B., Jang, S. F.,
Lee, S. T., and Lu, K. T. (1999)b. Chitosan-poly-
electrolyte complexation for the preparation of
gel beads and controlled release of anticancer
drug. II. Effect of pH-dependent ionic cross-
linking or interpolymer complex using tripoly-
phosphate or polyphosphate as reagent. J. Appl.
Polym. Sci . 74 (5), 1093-1107.
Monier, M., Ayadb, D. M., Weia, Y., and Sarhan,
A. A. (2010a). Adsorption of Cu(II), Co(II), and
Ni(II) ions by modified magnetic chitosan chelat-
ing resin. J. Hazard Mater . 177 (1-3), 962-970.
Monier, M., Ayad, D. M., Wei, Y., and Sarhan,
A. A. (2010b). Preparation and characterization
of magnetic chelating resin based on chitosan for
adsorption of Cu(II), Co(II), and Ni(II) ions. Re-
act. Funct. Polym . 70 (4), 257-266.
Negm, N. A. and Ali, H. E. (2010). Modification
of heavy metal uptake efficiency by modified
chitosan/anionic surfactant systems. Eng. Life
Sci . 10 (3), 218-224.
Ng J. C. Y., Cheung W. H., and McKay G.
(2002). Contact time optimization of two-stage
batch adsorber systems using the modified film-
pore diffusion model. J. Colloid Interf . Sci .
255 (1), 64-74.
Ngah, W. S. W. and Fatinathan, S. (2010). Ad-
sorption characterization of Pb(II) and Cu(II)
ions onto chitosan-tripolyphosphate beads: Ki-
netic, equilibrium and thermodynamic studies. J.
of Environmental Management 91 (4), 958-969.
Ni, C. and Xu, Y. (1996). Studies on Syntheses
and Properties of Chelating Resins Based on
Chitosan. J. Appl. Polym. Sci . 59 (3), 499-504.
Onsoyen, E. and Skaugrud, O. (1990). Metal re-
covery using chitosan. J. Chem. Tech. Biotech-
nol . 49 (4), 395-404.
Oshita, K., Sabarudin, A., Takayanagi, T., Os-
hima, M., and Motomizu, S. (2009.) Adsorption
behavior of uranium(VI) and other ionic species
on cross-linked chitosan resins modified with
chelating moieties. Talanta . 79 , 1031-1035.
Paik, I. (2001). Application of chelated minerals
in animal production. Asian-Australasian Jour-
nal of Animal Science 14 , 191-198.
Pearson, R. G. (1963). Hard and soft acids and
bases. J. Am. Chem. Soc . 85 , 3533-3539.
Peng, C., Wang, Y., and Tang, Y. (1998). Syn-
thesis of cross-linked chitosan-crown ethers and

evaluation of these products as adsorbents for
metal ions. J. Appl. Polym. Sci . 70 (3), 501-506.
Peplow, D. (1999). Environmental Impacts of
Mining in Eastern Washington, Center for Water
and Watershed Studies Fact Sheet, University of
Washington, Seattle.
Prasad, M., Saxena, S., and Amritphale, S. S.
(2002). Adsorption Models for Sorption of Lead
and Zinc on Francolite Mineral. Ind. Eng. Chem.
Res . 41 (1), 105-111.
Rabea, E. I., Badawy, M. E. T., Stevens, C. V.,
Smagghe, G., and Steurbaut, W. (2003). Chitosan
as Antimicrobial Agent: Applications and Mode
of Action. Biomacromolecules 4 (6), 1457-1465.
Radwan, A. A., Alanazi, F. K., and Alsarra, I. A.
(2010). Microwave Irradiation-Assisted Synthe-
sis of a Novel Crown Ether Cross-linked Chito-
san as a Chelating Agent for Heavy Metal Ions
(M +n ). Molecules . 15 (9), 6257-6268.
Ramesh, A., Hasegawa, H., Sugimoto, W., Maki,
T., and Ueda, K. (2008). Adsorption of gold(III),
platinum(IV) and palladium(II) onto glycine
modified cross-linked chitosan resin. Bioresour
Technol . 99 , 3801-3809.
Reddad, Z., Gerente, C., Andres, Y., and Cloirec,
P. (2002). Adsorption of several metal ions onto
a low-cost biosorbent: kinetic and equilibrium
studies. Environ. Sci. Technol . 36 (9), 2067-2073.
Repo, E., Warchol, J. K., Kurniawan, T. A., and
Sillanpaa, M. (2010). Adsorption of Co(II) and
Ni(II) by EDTA- and/or DTPA-modified chito-
san: Kinetic and equilibrium modeling. Chem.
Eng. J . 161 (1-2), 73-82.
Roberts, G. A. F. (1992). Chitin Chemistry , Mac-
Millan, London, UK.
Rodrigues, C. A., Laranjeira, M. C. M., De-Fa-
vere, V. T., and Stadler, E. (1998). Interaction of
Cu(II) on N-(2-pyridylmethyl) and N-(4-pyridyl-
methyl) chitosan. Polymer 39 (21), 5121-5126
Ruiz, M., Sastre, A., and Guibal, E. (2002). Pd
and Pt recovery using chitosan gel beads: II. In-
fluence of chemical and physical modification
on sorption properties. Sep Sci Technol . 37 (10),
2385-2403.
Ruiz, M., Sastre, A. M., and Guibal, E. (2003).
Osmium and iridium sorption on glutaraldehyde
cross-linked chitosan gel beads. Solv Extr Ion
Exch . 21 (2), 307-329.