Instruction Set Reference - The HCS12/9S12: An Introduction to Software and Hardware Interfacing - page 801

D.6 Downloading the S-Record File onto the Demo Board for Execution
To download the S19 file onto the demo board, one needs to select the Terminal window by
pressing Terminal. The D-Bug12 monitor prompt will appear. If not, then press the reset button
on the demo board. Type the load command at the command prompt and the enter key. After
that, press the Build menu and select Download as shown in Figure D.11.
After the Download command is selected, a popup dialog box, as shown in Figure D.12,
will appear. This dialog box allows us to specify the file to be downloaded. Click on the
Figure D.11 ■ Select the Download command
Figure D.12 ■ Select an S-record file to be downloaded