Sol–Gel Derived Hydroxyapatite Coatings on Metallic Implants: Characterization, In Vitro and In Vivo Analysis - Biological and Biomedical Coatings - page 40

Mullermai, C. M., C. Voigt, and U. Gross. 1990. Incorporation and degradation of hydroxyapatite
implants of different surface-roughness and surface-structure in bone. Scanning Microscopy 4
(3):613-624.
Nagarajan, S., V. Raman, and N. Rajendran. 2010. Synthesis and electrochemical characterization
of porous niobium oxide coated 316L SS for orthopedic applications. Materials Chemistry and
Physics 119 (3):363-366.
Nelea, V., C. Morosanu, M. Iliescu, and I. N. Mihailescu. 2003. Microstructure and mechanical prop-
erties of hydroxyapatite thin films grown by RF magnetron sputtering. Surface & Coatings
Technology 173 (2-3):315-322.
Nieh, T. G., A. F. Jankowski, and J. Koike. 2001. Processing and characterization of hydroxyapa-
tite coatings on titanium produced by magnetron sputtering. Journal of Materials Research 16
(11):3238-3245.
Ogiso, M., Y. Yamashita, and T. Matsumoto. 1998. Differences in microstructural characteristics of
dense HA and HA coating. Journal of Biomedical Materials Research 41 (2):296-303.
Oguchi, H., K. Ishikawa, S. Ojima, Y. Hirayama, K. Seto, and G. Eguchi. 1992. Evaluation of a high-
velocity flame-spraying technique for hydroxyapatite. Biomaterials 13 (7):471-477.
Ong, J. L., M. Appleford, S. Oh, Y. Yang, W. H. Chen, J. D. Bumgardner, and W. O. Haggard. 2006. The
characterization and development of bioactive hydroxyapatite coatings. JOM 58 (7):67-69.
Onoki, T., and T. Hashida. 2006. New method for hydroxyapatite coating of titanium by the hydro-
thermal hot isostatic pressing technique. Surface & Coatings Technology 200 (24):6801-6807.
Oonishi, H., M. Yamamoto, H. Ishimaru, E. Tsuji, S. Kushitani, M. Aono, and Y. Ukon. 1989. The effect
of hydroxyapatite coating on bone-growth into porous titanium-alloy implants. Journal of Bone
and Joint Surgery-British Volume 71 (2):213-216.
Overgaard, S., M. Lind, H. Glerup, C. Bünger, and K. Søballe. 1998. Porous-coated versus grit-blasted
surface texture of hydroxyapatite-coated implants during controlled micromotion: mechanical
and histomorphometric results. Journal of Arthroplasty 13 (4):449-458.
Park, J. B. 1984. Biomaterials Science and Engineering . New York, NY: Plenum Publishing Corporation.
Pastor, I., A. Salinas-Castillo, R. Esquembre, R. Mallavia, and C. R. Mateo. 2010. Multienzymatic
system immobilization in sol-gel slides: fluorescent superoxide biosensors development.
Biosensors and Bioelectronics 25 (6):1526-1529.
Pearce, E. I. F., E. M. Hancock, and I. H. C. Gallagher. 1984. The effect of fluorhydroxyapatite in
experimental human dental plaque on its pH, acid production and soluble calcium, phosphate
and fluride levels following glucose challenge. Archives of Oral Biology 29:521-527.
Pena, J., I. Izquierdo-Barba, A. Martinez, and M. Vallet-Regi. 2006. New method to obtain chitosan/
apatite materials at room temperature. Solid State Sciences 8 (5):513-519.
Perizzolo, D., W. R. Lacefield, and D. M. Brunette. 2001. Interaction between topography and coating
in the formation of bone nodules in culture for hydroxyapatite- and titanium-coated microma-
chined surfaces. Journal of Biomedical Materials Research 56 (4):494-503.
Pichugin, V. F., R. A. Surmenev, E. V. Shesterikov, M. A. Ryabtseva, E. V. Eshenko, S. I. Tverdokhlebov,
O. Prymak, and M. Epple. 2008. The preparation of calcium phosphate coatings on titanium
and nickel-titanium by rf-magnetron-sputtered deposition: composition, structure and micro-
mechanical properties. Surface and Coatings Technology 202 (16):3913-3920.
Poitout, D. G. 2004. Biomechanics and Biomaterials in Orthopedics . London: Springer.
Qi, G., S. Zhang, K. A. Khor, W. Weng, X. Zeng, and C. Liu. 2008. An interfacial study of sol-gel-derived
magnesium apatite coatings on Ti6Al4V substrates. Thin Solid Films 516 (16):5172-5175.
Rˇ ileanu, M., M. Cri ş an, N. Drˇ gan, D. Cri ş an, A. Galtayries, A. Brˇ ileanu, A. Ianculescu, V. S.
Teodorescu, I. Ni ţ oi, and M. Anastasescu. 2009. Sol-gel doped TiO 2 nanomaterials: a compara-
tive study. Journal of Sol - Gel Science and Technology 51 (3):315-329.
Ramires, P. A., A. Wennerberg, C. B. Johansson, F. Cosentino, S. Tundo, and E. Milella. 2003. Biological
behavior of sol-gel coated dental implants. Journal of Materials Science: Materials in Medicine 14
(6):539-545.
Ratner, B. D., A. S. Hoffman, F. J. Schoen, and J. E. Lemons. 1996. Biomaterials Science—An Introduction
to Materials in Medicine . San Diego, CA: Academic Press.