Biomedical Engineering Reference
In-Depth Information
[147] F.R. Marciano, L.F. Bonetti, L.V. Santos, N.S. Da-Silva, E.J. Corat, V.J. Trava-Airoldi: Antibacterial
activity on DLC and Ag-DLC films produced by PECVD.
Diamond Rel. Mater.
18 (2009) 1010.
[148] F.R. Marciano, L.F. Bonetti, N.S. Da-Silva, E.J. Corat, V.J. Trava-Airoldi: Wettability and antibac-
terial activity of modified diamond-like carbon films.
Appl. Surf. Sci.
255 (2009) 8377.
[149] F.Z. Cui, D.J. Li: A review of investigation on biocompatibility of diamond-like carbon and
carbon nitride films.
Surf. Coat. Technol.
131 (2000) 481.
[150] V.M. Tiainen: Amorphous carbon as a bio-mechanical coating—mechanical properties and bio-
logical applications.
Diamond Rel. Mater.
10 (2001) 153.
[151] R. Hauert: A review of modified DLC coatings for biological applications.
Diamond Rel. Mater.
12 (2003) 583.
[152] R. Hauert, U. Muller: An overview on tailored tribological and biological behavior of diamond-
like carbon.
Diamond Rel. Mater.
12 (2003) 171.
[153] A. Grill: Diamond-like carbon coatings as biocompatible materials—an overview.
Diamond Rel.
Mater.
12 (2003) 166.
[154] G. Dearnaley, J.H. Arps: Biomedical applications of diamond-like carbon (DLC) coatings: A
review.
Surf. Coat. Technol.
200 (2005) 2518.
[155] R.J. Narayan: Nanostructured diamondlike carbon thin films for medical applications.
Mater.
Sci. Eng. C
25 (2005) 405.
[156] R.K. Roy, K.R. Lee: Biomedical applications of diamond-like carbon coatings: A review.
J.
Biomed. Mater. Res. B
83B (2007) 72.
[157] H. Malchau, P. Herberts, L. Ahnfelt: Prognosis of total hip replacement in Sweden. Follow-up
of 96,675 operations performed 1978-1990.
Acta Orthop. Scand.
64 (1993) 497.
[158] H.C. Amstutz, P. Campbell, N. Kossovsky, I. Clarke: Mechanism and clinical significance of
wear debris-induced osteolysis.
Clin. Orthop. Rel. Res.
276 (1992) 7.
[159] D. Nordstrom, S. Santavirta, A. Gristina, Y.T. Konttinen: Immune-inflammatory response in the
totally replaced hip: A review of biocompatibility aspects.
Eur. J. Med.
2 (1993) 296.
[160] M. Lind, R.L. Smith, M.C.D. Tindale, Y.T. Konttinen, S. Santavirta, S.B. Goodman: Implants for
joint replacement and the host's immune response.
EOS-Riv Immunol.
18 (1998) 15.
[161] W.H. Harris: The problem is osteolysis.
Clin. Orthop.
Rel. Res.
311 (1995) 46.
[162] R. Lappalainen, A. Anttila, H. Heinonen: Diamond coated total hip replacements.
Clin. Orthop.
Rel. Res.
352 (1998) 118.
[163] A. Grill: Tribology of diamond-like carbon and related materials: An update review.
Surf. Coat.
Technol.
94-95 (1997) 507.
[164] A. Grill: Diamond-like carbon: State of the art.
Diamond Rel. Mater.
8 (1999) 428.
[165] B. Donnet: Recent progress on the tribology of doped diamond-like and carbon alloy coatings:
A review.
Surf. Coat. Technol.
100-101 (1998) 180.
[166] A. Gangopadhyay: Mechanical and tribological properties of amorphous carbon films.
Tribol.
Lett.
5 (1998) 25.
[167] R. Lappalainen, H. Heinonen, A. Anttila, S. Santavirta: Some relevant issues related to the use
of amorphous diamond coatings for medical applications.
Diamond Rel. Mater.
7 (1998) 482.
[168] D.P. Dowling, P.V. Kola, K. Donnelly, T.C. Kelly, K. Brumitt, L. Lloyd, R. Eloy, M. Therin,
N. Weill: Evaluation of diamond-like carbon-coated orthopaedic implants.
Diamond Rel. Mater.
6 (1997) 390.
[169] J.I. Onate, M. Comin, I. Braceras, A. Garcia, J.L. Viviente, M. Brizuela, N. Garagorri, J.L. Peris,
J.I. Alara: Wear reduction effect on ultra-high-molecular-weight polyethylene by application
of hard coatings and ion implantation on cobalt chromium alloy, as measured in a knee wear
simulation machine.
Surf. Coat. Technol.
142-144 (2001) 1056.
[170] F. Platon, P. Fournier, S. Rouxel: Trobological behaviour of DLC coatings compared to different
materials used in hip joint prostheses.
Wear
250 (2001) 227.
[171] D. Sheeja, B.K. Tay, L.N. Nung: Feasibility of diamond-like carbon coatings for orthopaedic
applications.
Diamond Rel. Mater.
13 (2004) 184.
[172] D. Sheeja, B.K. Tay, L.N. Nung: Tribological characterization of surface modified UHMWPE
against DLC-coated Co-Cr-Mo.
Surf. Coat. Technol.
190 (2005) 231.
