Biomedical Engineering Reference
In-Depth Information
42. Pruim GJ, de Jongh HJ, ten Bosch JJ (1980) Forces acting on the mandible during bilateral
static bite at different bite force levels. J Biomech 13(9):755-763
43. Moller E (1996) The chewing apparatus. Acta Physiologica Scandinavia, Copenhagen
44. Pruim G, Ten Bosch JJ, De Jongh HJ (1978) Jaw muscle EMG-activity and static loading of
the mandible. J Biomech 11:389-395
45. Nahmias I (2000) Contribution `al'etude de la cinematique mandibulaire. In: Orthodontie.
Universit´eParis5,Paris
46. Caix PaJC (2000) Anatomie fonctionnelle. In: L.d.A.M.-F.e.(ed) Chirurgicale, Universite
Bordeaux 2, Bordeaux
47. Mesnard M, Coutant JC, Aoun M, Morlier J, Cid M, Caix Ph (2012) Correlation between ge-
ometry and kinematic characteristics in the temporomandibular joint
.
Comput Meth Biomech
Biomed Eng 15(4):393-400
48. DeVocht JW et al (2001) Experimental validation of a finite element model of the temporo-
mandibular joint. J Oral Maxillofac Surg 59(7):775-778
49. Vollmer D et al (2000) Experimental and finite element study of a human mandible. J Cranio-
Maxillofac Surg 28(2):91-96
50. Lovald S et al (2010) Biomechanical optimization of bone plates used in rigid fixation of
mandibular symphysis fractures. J Oral Maxillofac Surg 68(8):1833-1841
51. Hart RT et al (1992) Modeling the biomechanics of the mandible - a 3-dimensional finite-
element study. J Biomech 25(3):261-286
52. De Santis R et al (2004) Continuous fibre reinforced polymers as connective tissue replace-
ment. Compos Sci Technol 64(6):861-871
53. Liu Z, Fan YB, Qian YL (2007) Biomechanical simulation of the interaction in the tem-
poromandibular joint within dentate mandible: a finite element analysis
.
In: 2007 Ieee/Icme
international conference on complex medical engineering, vols 1-4, pp 1842-1846
54. Korioth TWP, Romilly DP, Hannam AG (1992) 3-dimensional finite-element stress-analysis of
the dentate human mandible. Am J Phys Anthropol 88(1):69-96
55. Maurer P, Holweg S, Schubert J (1999) Finite-element-analysis of different screw-diameters in
the sagittal split osteotomy of the mandible. J Cranio-Maxillofac Surg 27(6):365-372
56. Scaf de Molon R et al (2011) In vitro comparison of 1.5 mm vs. 2.0 mm screws for fixation in
the sagittal split osteotomy
.
J Cranio-Maxill Surg 39(8):574-577
57. Mesnard M et al (2011) Biomechanical analysis comparing natural and alloplastic tem-
poromandibular joint replacement using a finite element model
.
J Oral Maxil Surg 69(4):
1008-1017
58. Ramos A et al (2011) Numerical and experimental models of the mandible
.
Exp Mech 51(7):
1053-1059
59. Mercuri LG, Edibam NR, Giobbie-Hurder A (2007) Fourteen-year follow-up of a patient-fitted
total temporomandibular joint reconstruction system. J Oral Maxillofac Surg 65(6):1140-1148
60. Roberts WE, Huja S, Roberts JA (2004) Bone modeling: biomechanics, molecular mecha-
nisms, and clinical perspectives. Semin Orthod 10(2):123-161
