Wetting at High Temperature - Drops and Bubbles in Contact with Solid Surfaces - page 328

on the solid substrate makes the contact angle to vary from point to point along
the triple line.
10. When calculating the work of adhesion W a (Eq. (2)), the contact angles and
surface tension data should come from measurements made under the same
conditions (and with the same substrate).
F. References
1. Eustathopoulos, N., Nicholas, M. G. and Drevet, B., Wettability at High Temperatures. Pergamon
Materials Series, Oxford, 1999.
2. Chatain, D., Ghetta, V. and Fouletier, J., in: Ceramic Microstructure, Control at the Atomic Level,
A. P. Tomsia (Ed.). New York, Plenum Press, 1998, p. 349.
3. Backhaus-Ricoult, M., Acta Mater., 48 (2000) 4365.
4. Laurent, V., Chatain, D., Chatillon, C. and Eustathopoulos, N., Acta Met., 36 (1988) 1797.
5. Arato, E., Ricci, E. and Costa, P., Mater. Chem. Phys., 114 (2009) 809.
6. Ricci, E., Giuranno, D., Arato, E. and Costa, P., Materials Science and Engineering A, 495 (2008)
27.
7. Arato, E., Ricci, E. and Costa, P., Surf. Science, 602 (2008) 349-357.
8. Ricci, E., Arato, E., Passerone, A. and Costa, P., Adv. Colloid Interface Sci., 117 (2005) 15.
9. Novakovic, R., Ricci, E., Gnecco, F., Giuranno, D. and Borzone, G., Surf. Sci., 599 (2005) 15.
10. Ratto, M., Ricci, E., Arato, E. and Costa, P., Met. Trans. B, 32B (2001) 903.
11. Ratto, M., Ricci, E. and Arato, E., J. Crystal Growth, 217 (2000) 233.
12. Saiz, E., Cannon, R. M. and Tomsia, A. P., Annu. Rev. Mater. Res., 38 (2008) 197-226.
13. Wittmer, M., Mat. Res. Soc. Symp. Proc., 40 (1985) 393-398.
14. Kim, J. Y., Hardy, J. S. and Weil, K. S., J. Am. Ceram. Soc., 88 (2005) 2521-2527.
15. Diemer, M., Neubrand, A., Trumble, K. P. and Rodel, J., J. Am. Ceram. Soc., 82 (1999) 2825-
2832.
16. Chatain, D., Chabert, F., Ghetta, F. and Fouletier, J., J. Am. Ceram. Soc., 77 (1994) 197-201.
17. Chatain, D., Rivollet, I. and Eustathopoulos, N., J. Chim. Phys., 84 (1987) 201-203.
18. Sangiorgi, R., Muolo, M. L., Chatain, D. and Eustathopoulos, N., J. Am. Ceramic Soc., 71 (1988)
742-748.
19. Eustathopoulos, N., Curr. Opin. Solid State Mater. Sci., 9 (2005) 152-160.
20. Naidich, Y. V., Curr. Opin. Solid State Mater. Sci., 9 (2005) 161-166.
21. Saiz, E. and Tomsia, A. P., Curr. Opin. Solid State Mater. Sci., 9 (2005) 167-173.
22. Wynblatt, P., Acta Mater., 48 (2000) 4439-4447.
23. Benhassine, M., Saiz, E., Tomsia, A. P. and De Coninck, J., Acta Mater., 59 (2011) 1087-1094.
24. Webb III, E. B., Grest, G. S., Heine, D. R. and Hoyt, J. J., Acta Mater., 53 (2005) 3163-3177.
25. Bertrand, E., Blake, T. D. and De Coninck, J., J. Phys.-Cond. Matter, 21 (2009) 464124.
26. Mattsson, A. E., Schultz, P. A., Desjarlais, M. P., Mattsson, T. R. and Leung, K., Modell. Simul.
Mater. Sci. Eng., 13 (2005) R1-R31.
27. Wang, X. G. and Smith, J. R., J. Am. Ceram. Soc., 86 (2003) 696-700.
28. Zhang, W. and Smith, J. R., Phys. Rev. Lett., 85 (2000) 3225-3228.
29. Finnis, M. W., J. Phys., Condens. Matter, 8 (1996) 5811-5836.
30. Muolo, M. L., Valenza, F., Passerone, A. and Passerone, D., J. Mater. Sci. Eng. A, 495 (2008)
153-158.
31. Hashibon, A., Elsässer, C. and Rüle, M., Acta Mater., 55 (2007) 1657-1665.