Digital Signal Processing Reference
In-Depth Information
13. Elmore G (1985) De-embedded measurements using the HP 8510 microwave network ana-
lyzer. In: 25th Autom RF Tech Group (ARFTG) Conf Dig, vol 7, pp 124-143
14. Engen GF, Hoer CA (1979) Thru-Reflect-Line: an improved technique for calibrating the dual
six-port automatic network analyzer. IEEE Trans Microw Theory Tech MTT-27(12):987-993
15. Fitzpatrick J (1978) Error models for systems measurement. Microw J 21(5):63-66
16. Franzen NR, Speciale RA (1975) A new procedure for system calibration and error removal
in automated S-parameter measurements. In: 5th European Microw Conf, pp 69-73
17. Gonzalez G (1997) Microwave Transistor Amplifiers: Analysis and Design, 2nd edn. Prentice-
Hall, Upper Saddle River
18. Infineon (2007) Simple microstrip matching for all impedances. Application Note No 022.
URL
http://www.infineon.com
19. Lane R (1984) De-embedding device scattering parameters. Microw J 8:149-156
20. Lee TH (1998) The Design of CMOS Radio-Frequency Integrated Circuits. Cambridge Uni-
versity Press, Cambridge
21. Marks RB (1991) A multiline method of network analyzer calibration. IEEE Trans Microw
Theory Tech 39(7):1205-1215
22. Murata (2007) Murata Chip S-parameter and Impedance Library Version 3.12.0. URL
http://
www.murata.com/designlib/mcsil/index.html
23. Nickel JG, Schutt-Aine JE (2003) Matched coupled microstrip transistor amplifier methodol-
ogy. IEEE Trans Adv Packag 26(4):361-367
24. O'Reilly GT, Neidert RE, Wilson LK (1974) Designing microstrip matching networks for
microwave-transistor power amplifiers. IEEE Trans Microw Theory Tech 22(12):1323-1325
25. Pieper R, Dellsperger F (2001) Personal computer assisted tutorial for Smith charts. In: 2001
Proc 33rd Southeast Symp Syst Theory, Athens, OH, pp 139-143
26. Pozar DM (1998) Microwave Engineering, 2nd edn. Wiley, New York
27. Rehnmark S (1974) On the calibration process of automatic network analyzer systems. IEEE
Trans Microw Theory Tech 22(4):457-458
28. Rogers (2006) RO4000 series high frequency circuit materials. Data Sheet 92-004. URL
http://www.rogerscorp.com/acm/literature.aspx
29. Rytting D (1998) Network analyzer error models and calibration methods. IEEE MTT/ED
Seminar:
Calibration
and
Error
Correction
Techniques
for
Network
Analysis.
URL
http://cpd.ogi.edu/IEEE-MTT-ED/DougRyttingSeminar.htm
30. Scott JB (2005) Investigation of a method to improve VNA calibration in planar dispersive
media through adding an asymmetrical reciprocal device. IEEE Trans Microw Theory Tech
53(9):3007-3013
31. Silvonen KJ (1992) A general approach to network analyzer calibration. IEEE Trans Microw
Theory Tech 40(4):754-759
32. Vaitkus R, Scheitlin D (1982) A two-tier deembedding technique for packaged transistors In:
1982 IEEE MTT-S Int Microw Symp Dig, vol 82, pp 328-330
33. Vaitkus RL (1986) Wide-band de-embedding with a short, an open, and a through line. Proc
IEEE 74(1):71-74
34. Wartenberg SA, Grajek P (2001) De-embedding PCB fixtures for package characterization.
Microw Opt Technol Lett 31(2):111-112
35. Williams D (1990) De-embedding and unterminating microwave fixtures with nonlinear least
squares. IEEE Trans Microw Theory Tech 38(6):787-791