Hardware Reference
In-Depth Information
98. Ayten UE, Sagbas M, Sedef H (2012) Electronically tunable sinusoidal oscillator circuit with
current and voltage outputs. Int J Electron 99:1133-1144
99. Yesil A, Kacar F, Gurkan K (2014) Lossless grounded inductance simulator employing single
VDBA and its experimental band-pass filter application. Int J Electron Commun (AEU)
68:143-150
100. Soliman AM (2005) Low voltage high current gain CMOS digitally controlled fully differ-
ential CCII variable gain amplifier application example. ISCAS 2:1000-1003
101. Loizos DN, Sotiriadis PP, Cauwenberghs G (2008) A translinear SiGe BiCMOS current
controlled oscillator with 80 Hz-800 MHz tuning range. Analog Integr Circ Sig Process
57:107-115
102. Sotner R, Jerabek J, Herencsar N, Hrubos Z, Dostal T, Vrba K (2012) Study of adjustable of
gains for control of oscillation frequency and oscillation condition 3R-2C oscillator.
Radioengineering 21:392-402
103. Siripruchyanun M, Phattanasak M, Jaikla W (2007) Temperature-insensitive current con-
veyor based floating simulator topology. In: International symposium on integrated circuits
(ISIC 07), Singapore, pp 65-68
104. Tangsrirat W, Dumawipata T, Unhavanich S (2004) Simulation of electronically tunable
lossless floating inductor using current controlled differential current voltage conveyors. In:
International symposium on communications and information technology (ISCIT 2004),
Sapporo, Japan, pp 39-42
105. Yakout MA, Abdelfattah AI, Elbazz AS (2000) BiCMOS current conveyors: design and
application. IEEE Int Symp Circ Syst 3:463-466
106. Popovic J, Pavasovic A, Vasiljevic D (1997) Low-power high bandwidth CMOS current
conveyor. Proceedings of the international conference on microelectronics, Yugoslavia, vol.
2, pp 693-696
107. Lu CW, Shen YC, Sheu ML (2007) A high-driving class -AB buffer amplifier with a new
Pseudo source follower. In: IFIP International conference very large scale integration. (VLSI-
SoC2007), Atlanta, GA, Canada, pp 105-109
108. Nishio M, Sato H, Suzuki (1985) A gyrator constructed by CCII with variable current transfer
ratio. In: Proceedings of ISCAS, Kyoto, Japan, pp 93-96
109. Wilson B, Lidgey FJ, Toumazou C (1988) Current mode signal processing circuits. In:
ISCAS, Helsinki, Finland, pp 2665-2667
110. Wilson B (1989) Performance analysis of current conveyors. Electron Lett 25:1596-1598
111. Guo-Hua W, Fukui Y, Kubota K, Watanabe K (2011) Voltage-mode to current-mode
conversion by an extended dual transformation. In: ISCAS, Singapore, pp 1833-1836
112. Payne A, Toumazou C (1992) High frequency self-compensation of current-feedback
devices. IEEE Int Symp Circ Syst 3:1376-1379
113. Bruun E, Olesen OH (1992) Conveyor implementations of generic current mode circuits. Int J
Electron 73(1):129-140
114. Carlosena A, Moschytz GS (1994) Design of variable-gain current conveyors. IEEE Trans
Circ Syst-I 41:79-81
115. Fabre A, Barthelemy H (1994) Composite second-generation current conveyor with reduced
parasitic resistance. Electron Lett 30:377-378
116. Cabeza R, Carlosena A, Serrano L (1994) Unified approach to the implementations of
universal active devices. Electron Lett 30:618-620
117. Toumazou C, Lidgey J (1994) Current-feedback Op-amps: a blessing in Disguise? IEEE Circ
Dev Mag 10:34-37
118. Moschytz GS, Carlosena A (1994) A classification of current-mode single-amplifier biquads
based on a voltage-to-current transformation. IEEE Trans Circ Syst-II 41:151-156
119. Fabre A (1994) New formulations to describe translinear mixed cells accurately. IEE Proc
Circ Dev Syst 141:167-173
120. Hou CL, Shen B, Hwang J (1995) Novel applications of operational mirrored amplifiers with
buffers. Chung Yuan J 23:133-139
Search WWH ::
Custom Search