Recent Advances and Future Directions of Research - Current Conveyors: Variants, Applications and Hardware Implementations - page 530

34. Centurelli F, Diqual M, Ferri G, Guerrini NC, Scotti G, Trifiletti A (2005) A novel dual-output
CCII based single-ended to differential converter. Analog Integr Circ Sig Process 43:87-90
35. Gianni C, Pennisi S, Scotti G, Trifiletti A (2007) The universal circuit simulator: a mixed
signal approach to n-port network and impedance synthesis. IEEE Trans Circ Syst-I
54:2178-2183
36. Godara B, Fabre A (2008) A new application of current conveyors: the design of wideband
controllable low-noise amplifiers. Radioengineering 17:91-100
37. Cuautle ET, Frias DM, Lopez CS, Villasenor MAD (2008) Synthesis of CCII-s by
superimposing VFs and CFs through genetic operations. IEICE Electron Express 5:411-415
38. Raikos G, Vlassis S, Psychalinos C (2012) 0.5 V bulk-driven analog building blocks. Int J
Electron Commun (AEU) 66:920-927
39. Horng JW (2012) Analytical synthesis of general high-order voltage/current transfer functions
using CCIIs. Microelectron J 43:546-554
40. Metin B, Pal K, Cicekoglu O (2012) A new approach for high-input impedance in voltage
mode filters using first-generation current conveyor in place of second-generation current
conveyor. Int J Electron 99:131-139
41. Khateb F, Jaikla W, Kumngern M, Prommee P (2013) Comparative study of sub-volt differ-
ential difference current conveyor. Microelectron J 44:1278-1284
42. Mahmoud SA, Soliman EA (2013) Multi-standard receiver baseband chain using digitally
programmable OTA based on CCII and current division networks. J Circ Syst Comput 22:20.
doi: 10.1142/S0218126613500199
43. Fakhfakh M, Pierzchala M (2013) Synthesis of active inductors using SFG stamps. Micro-
electronics J 44:1107-1122
44. Ercan H, Alci M (2013) A new design for a BI-CMOS controlled current conveyor.
Elecktronika IR Elektrotechnika 19:56-60
45. Khateb F, Kumngern M, Spyridon V, Psychalinos C (2014) Differential difference current
conveyor using Bulk-driven technique for ultra-low-voltage applications. Circ Syst Sig Pro-
cess 33:159-176
46. Pushkar KL, Bhaskar DR, Prasad D (2014) Voltage-mode new universal biquad filter config-
uration using a single VDIBA. Circ Syst Sig Process 33:275-285
47. Thankachan S, Pattanaik M, Rajput SS (2008) A 0.5V BiCMOS class-A current conveyor.

World Acad Sci Eng Tech 2:473-476
48. Abbas Z, Olivieri M, Yakupov M, Ripp A (2013) Design centering/yield optimization of
power aware band pass filter based on CMOS current conveyor (CCCII+). Microelectron J
44:321-331
49. Seguin F, Godara B, Alicalapa F, Fabre A (2004) A gain-controllable wide-band low-noise
amplifier in low-cost 0.8 m Si BiCMOS technology. IEEE Trans Microw Tech 52:154-160

50. Erdal C, Kuntman H, Kafali S (2004) A current controlled conveyor based proportional-
integral-derivative (PID) controller. J Electr Electron Eng 4:1243-1248

μ