Graphics Reference
In-Depth Information
Click the
Shape
list arrow, and then select a brush shape, such as Flat Point, Flat
Angle, Round Blunt, or Round Fan.
Specify the following options:
•
Size.
Specify the diameter of the brush between 1mm and 10mm. The brush
size is measured at the point where the bristles meet the handle.
•
Bristle Length.
Specify the length of the bristle between 25% and 300%.
•
Bristle Density.
Specify the density of the bristle between 1% and 100%. This
option is calculated based on the brush size and bristle length. The density is
the number of bristles in a specified area of the brush neck.
•
Bristle Thickness.
Specify the thickness of the bristle from fine to coarse
between 1% and 100%.
•
Paint Opacity.
Specify the opacity of the selected paint between 1% (translu-
cent) and 100% (opaque). This value is the maximum opacity used in the
brush.
You can use the numeric keys (0-9) as shortcuts to set bristle brush opacity;
0=100%, 1=10%, 9=90%, etc.
•
Stiffness.
Specify the rigidness of the bristle between 1% to 100%. A lower
value creates flexible bristles, while a higher value creates stiffer bristles.
Click
OK
.