Graphics Programs Reference
In-Depth Information
12.
Click to select the second letter “O” in “ZOO,” and change the following using the
Touch Type tool:
• Rotate the letter clockwise 35° (clockwise rotation shows a negative value).
• Click and drag (what was) the upper-right corner of the box, away from the center,
until you see roughly 105% for width (W:) and height (H:) in the measurement label.
• Drag the letter from the center into the position you see in the figure.
13.
Click to select the letter “T” in “TALES,” and change the following using the Touch
Type tool:
• Click and drag the upper-right corner of the box, away from the center, until you see
roughly 150% for width (W:) and height (H:) in the measurement label.
Note
There are limits to how far you can drag in any direction. Those limits are
based on the kerning and baseline shift value limits.
