Drillstring Vibrations: Classic Ideas and Modern Approaches - Wave Propagation in Drilling, Well Logging and Reservoir Applications - page 256

Vandiver, J.K., Nicholson, J.W. and Shyu, R.J., “Case Studies of the Bending
Vibration and Whirling Motion of Drill Collars,” SPE/IADC Paper No. 18652,
1989 SPE/IADC Drilling Conference , New Orleans, Louisiana, February 28-
March 3, 1989.
Walker, B.H. and Friedman, M.B., “Three-Dimensional Force and Deflection
Analysis of a Variable Cross-Section Drill String,” Journal of Pressure Vessel
Technology , May 1977, pp. 367-373.
Wang, J.K., Kalsi, M.S., Chapelle, R.A. and Beasley, T.R., “A Practical
Approach to Jarring Analysis,” SPE/IADC Paper No. 16155, 1987 SPE/IADC
Drilling Conference , New Orleans, March 15-18, 1987.
Warren, T.M., “Drilling Model for Soft Formation Bits,” Journal of Petroleum
Technology , June 1981, pp. 963-970.
Warren, T.M., “Factors Affecting Torque for a Tricone Bit,” SPE Paper No.
11994, 58th Annual Technical Confrence and Exhibition , San Francisco, Ca.,
Oct. 5-8, 1983.
Warren, T.M., “Penetration Rate Performance of Roller Cone Bits,” SPE Paper
No. 13259, 59th Annual Technical Conference and Exhibition , Houston, Texas,
Sept. 16-19, 1984.
Whitham, G.B., Linear and Nonlinear Waves , John Wiley and Sons, New York,
1974.
Wolf, S.F., Zacksenhouse, M. and Arian, A., “Field Measurements of
Downhole Drilling Vibrations,” SPE Paper No. 14330, 60th Annual Technical
Conference and Exhibition of the Society of Petroleum Engineers , Las Vegas,
Nevada, Sept. 22-25, 1985.
Yang, J.H., and Gray, K.E., “Single-Blow Bit-Tooth Impact Tests on Saturated
Rocks Under Confining Pressure, II: Elevated Pore Pressure,” So c i e ty o f
Petroleum Engineers Journal , December 1967, pp. 389-408.