Drillstring Vibrations: Classic Ideas and Modern Approaches - Wave Propagation in Drilling, Well Logging and Reservoir Applications - page 251

Cohen, J.H., Maurer, W.C. and Westcott, P.A., “High-Performance TSD Bits
Improve Penetration Rate,” Oil & Gas Journal , Apr. 12, 1993, pp. 47-51.
Cook, R.L., Nicholson, J.W., Sheppard, M.C. and Westlake, W., “First Real
Time Measurements of Downhole Vibrations, Forces, and Pressures Used to
Monitor Directional Drilling Operations,” SPE/IADC Paper No. 18651, 1989
SPE/IADC Drilling Conference , New Orleans, Louisiana, February 28 - March
3, 1989.
Costo, B., Cunningham, L.W., Martin, G.J., Mercado, J., Mohon, B. and Xie, L.,
“Working Out of a Tight Spot,” Schlumberger Oilfield Review , Spring 2012, pp.
16-23.
Cunningham, R.A., “Analysis of Downhole Measurements of Drill String
Forces and Motions,” Journal of Engineering for Industry, Transactions of the
ASME , May 1968, pp. 208-216.
Dareing, D.W., “Vibrational Forces and Motions in Rotary Drill Strings,” 1972
Rotary Drilling Conference, International Association of Drilling Contractors ,
Dallas, Texas, Feb. 23-25, 1972.
Dareing, D.W., “Rotary Speed, Drill Collars Control Drill String Bounce,” Oil
& Gas Journal , June 6, 1983, pp. 63-68.
Dareing, D.W., “Vibrations Increase Available Power at the Bit,” Oil & Gas
Journal , March 5, 1984, pp. 91-96.
Dareing, D.W., “Vibrations Increase Available Power at the Bit,” Journal of
Energy Resources Technology, Transactions of the ASME , March 1985, pp. 138-
141.
Dareing, D.W. and Livesay, B.J., “Longitudinal and Angular Drill String
Vibrations with Damping,” Journal of Engineering for Industry, Transactions of
the ASME , October 1968, pp. 1-9.
Dareing, D.W., and Radzimovsky, E.I., “Effect of Dynamic Bit Forces on Bit
Bearing Life,” Society of Petroleum Engineers Journal , Dec. 1965, pp. 272-276.
Deily, F.H., Dareing, D.W., Paff, G.H., Ortloff, J.E., and Lynn, R.D.,
“Downhole Measurements of Drill String Forces and Motions,” Petroleum
Mechanical Engineering Conference, American Society of Mechanical
Engineers , Philadelphia, Pa., Sept. 17-20, 1967.
Deily, F.H., Dareing, D.W., Paff, G.H., Ortloff, J.E., and Lynn, R.D.,
“Downhole Measurements of Drill String Forces and Motions,” Journal of
Engineering for Industry , Transactions of the ASME, May 1968, pp. 217-225.
Den Hartog, J.P., Advanced Strength of Materials , McGraw-Hill, New York,
1952.