Biomedical Engineering Reference
In-Depth Information
Rao, R.R. and Kannan, T.S. 2002. Synthesis and sintering of hydroxyapatite-zirconia composites.
Mater. Sci. Eng. C20: 187-193.
Reis, R.L. and Monteiro, F.J. 1996. Crystallinity and structural changes in HA plasma-sprayed coat-
ings induced by cyclic loading in physiological media. J. Mater. Sci.: Mater. Med. 7: 407-411.
Reser, M.K., American Ceramic Society. 1983. Phase Diagrams for Ceramists, Volume 5, American
Ceramic Society, Washington, DC.
Rey, C., Freche, M., Heghebaert, M., Heuughebaert, J.C., Lacout, J.L., Lebugle, A., Szilagyi, J., and
Vignoles, M. 1991. Apatite Chemistry in Biomaterials, Shaping, and Biological Behaviour. In:
Bonfield, W., Hasrings, G.W., and Tanner, K.E. (eds.), Bioceramics, Volume 4, 4th International
Symposium on Ceramics in Medicine, London, UK.
Rohanizadeh, R., Trecant-Viana, M., and Daculsi, G. 1999. Ultrastructural study of apatite precipita-
tion in implanted calcium phosphate ceramic: Influence of the implantation site. Calcif. Tissue
Int. 64: 430-436.
Rose, F.R., Cyster, L.A., Grant, D.M., Scotchford, C.A., Howdle, S.M., Kevin, K.M., and Shakesheff,
M. 2004. In vitro assessment of cell penetration into porous hydroxyapatite scaffolds with a
central aligned channel. Biomaterials 25: 5507-5514.
Ruan, L., Wang, X., and Li, L. 1996. Structural analysis of new crystal phase for calcium phosphate in
AL-A phase transition. Mater. Res. Bull. 31: 1207-1212.
Sampath, S. and Herman, H. 1996. Rapid solidification and microstructure development during
plasma spray deposition. J. Therm. Spray Technol. 5: 445-456.
Sampath, S. and Jiang, X. 2001. Splat formation and microstructure development during plasma
spraying: Deposition temperature effects. Mater. Sci. Eng. A 304-306: 144-150.
Schroeder, M. and Unger, R. 1997. Thermal spray coatings replace hard chrome. Adv. Mater. Process.
152: 19-21.
Sevostianov, I. and Kachanov, M. 2000. Modeling of the anisotropic elastic properties of plasma-
sprayed coatings in relation to their microstructure. Acta Mater. 48: 1361-1370.
Shaw, L.L., Barber, B., Jordan, E.H., and Gell, M. 1998. Measurements of the interfacial fracture energy
of thermal barrier coatings. Scr. Mater. 39: 1427-1434.
Shen, T.D., Koch, C.C., Tsui, T.Y., and Pharr, G.M. 1995. On the elastic moduli of nanocrystalline Fe, Cu,
Ni, and Cu-Ni alloys prepared by mechanical milling/alloying. J. Mater. Res. 10: 2892-2896.
Shirkhanzadeh, M. 1994. X-ray diffraction and Fourier transform infrared analysis of nanophase
apatite coatings prepared by electrocrystallization. Nanostruct. Mater. 4: 677-684.
Shirkhanzadeh, M. 1995. Calcium phosphate coatings prepared by electrocrystallization from aque-
ous electrolytes. J. Mater. Sci.: Mater. Med. 6: 90-93.
Sih, G.C. 1991. Mechanics of Fracture Initiation and Propagation . Kluwer Academic Publishers,
Culembourg, The Netherlands.
Silva, C.C., Thomazini, D., Pinheiro, A.G., Lanciotti, F., Sasaki, J.M., Góes, J.C., and Sombra, A.S.B.
2002. Optical properties of hydroxyapatite obtained by mechanical alloying. J. Phys. Chem.
Solids. 63: 1745-1757.
Silver, F.H. and Christiansen, D.L. 2000. Biomaterials Science and Biocompatibility. Springer-Verlag,
New York.
Soga, N. 1982. Three-band theory and elastic moduli of glass. J. Non-Cryst. Solids. 52: 365-375.
Sordelet, D.J., Besser, M.F., and Logsdon, J.L. 1998. Abrasive wear behavior of Al-Cu-Fe quasicrystal-
line composite coatings. Mater. Sci. Eng. A255: 54-65.
Stein, G.S. and Lian, J.B. 1993 . Endocrine Rev. 14: 424-442.
Steinhauser, S. and Wielage, B. 1997. Composite coatings: Manufacture, properties and application.
Proc. 10th Conf. on Surf. Modif. Technol ., Singapore, pp. 436-450.
Stubican, V.S. 1988. Phase equilibria and metastabilities in the systems ZrO 2 -MgO, ZrO 2 -CaO,
and  ZrO 2 -Y 2 O 3 . In: Somiya, S., Yamamoto, N., Hanagida, H. (eds.), Advances in Ceramics,
Volume  24A, Science and Technology of Zirconia III , The American Ceramic Society, Inc., Ohio,
pp. 71-82.
Sturgeon, A.J. and Harvey, M.D.F. 1995. High velocity oxyfuel spraying of hydroxyapatite. Proc.
ITSC'95 , Kobe, May 1995, pp. 933-938.
Search WWH ::




Custom Search